Bluetooth Cell Phone Work

Bluetooth Technology

The way Bluetooth works for a cell phone is similar to all other devices using Bluetooth technology, by using radio waves to transmit the cell phone signals to a wireless headset that is Bluetooth enabled. You can establish connections by either setting up access from a Bluetooth enabled cell phone to the Bluetooth compatible wireless device or, in the case of most new models, by letting the devices find each other by using radio waves.

The Bluetooth's core system consists of three components, the RF (radio drequency) transceiver, baseband and protocol stack. These three components enable the connection of devices and allow the exchange of data between Bluetooth capable devices.

Bluetooth Enabling

A Bluetooth capable cell phone has the search option to find the Bluetooth device you would want to use within range. Then the cell phone goes into a pairing mode. A user turns on the Bluetooth headset and the cell phone finds it. Once the Bluetooth cell phone finds the device, it will synchronize the two together. Once a user acknowledges or accepts the headset option provided it should start working. Every time a Bluetooth headset is powered on, it can always be used right away. However, a user can expect the occasional drop in signal.

Frequency and Power

Bluetooth uses an open frequency similar to that used by WiFi and other similar wireless devices using the 2.4GHz band frequency. Due to the low frequency used, there are no interferences experienced with other similar devices. In addition, by using low power signals, Bluetooth can also avoid interference. It is also capable of offering a range of up to 100 feet with data transfer rate of 1Mb per second.

Compatible Devices

As long as the cell phone has Bluetooth, it can work with other Bluetooth enabled devices, such as wireless headsets, MP3 devices, hand-held gaming devices, PDAs and car kits for hands-free operation. Having a wireless headset or car kits for hands-free operation is very important especially for driving in some states that have laws prohibiting using a cell phone by hands while driving. In addition, with an MP3 player, having a Bluetooth cell phone allows the transfer of streaming audio and video, provided they have these capabilities. You can send games between Bluetooth devices that support these functions for added entertainment. A Bluetooth cell phone makes life a little safer and hassle-free by allowing constant use anywhere without using wired connections. It also takes advantage of Bluetooth enabled accessories.

Tags: cell phone, Bluetooth enabled, Bluetooth cell, between Bluetooth, Bluetooth capable

Buy A Car Gps/Mp3 Player

When searching for a GPS (Global Positioning System) navigator, consider buying one that also plays MP3 files. GPS/MP3 players are reasonably priced and are a good way to listen to music while on the road. Follow the instructions below to buy a car GPS/MP3 player.

Instructions

1. Determine your budget. GPS/MP3 players cost from $200 to $500 and beyond. As a general rule, the more features the device has, the more it costs.

2. Select the type of display and amount of memory that suits your needs. Expensive models have large color displays and enough memory to store hundreds of songs. Cheaper models have smaller displays and store fewer songs. Decide which GPS/MP3 best matches your travel habits. You may want to buy a bigger and better system if you travel frequently.

3. Make sure the device is compatible with your home computer system. You can find this information on the box, or you can ask a salesclerk. When buying online, read the description given and try to find a link to the GPS/MP3 owner's manual.

4. Consider the size of the device before you buy. Choose a smaller model if you intend to use the GPS/MP3 player outside your car.

5. Find the best deal and make your purchase. Look for the best price at your local retail stores, or purchase the device online. Consider using Overstock or eBay.

Tags: models have

Install A Canon Pixma Ip4200

The Canon PIXMA ip4200 printer is an advanced inkjet photo printer with a very high resolution of up to 9600x2400 color dpi. Its ContrastPLUS5 color feature creates laser-quality text printouts and real-life photo images that can be simultaneously printed from dual trays at an exceptional speed. It is easy to install and operate along with your computer. Its product features are outstanding, and so are its outputs when printed out on plain or photo paper.

Instructions

Install a Canon PIXMA iP4200

1. Make sure that your computer and printer are on and properly connected to each other via the printer cable. If you do not have a CD installer and need access to a printer driver online, follow Steps 2 to 6. If you have a CD installer specifically for the Canon PIXMA ip4200 model, go straight to Step 7.

2. Connect to the Internet.

3. Go to the following Canon website for drivers: http://www.soft82.com/download/windows/canon-pixma-ip4200-printer-driver.

4. Select the Canon PIXMA iP4200.

5. Download the file needed by selecting "Save As" so that the file will be automatically saved in the folder you indicated. If you selected either "Run" or "Open," the file will still be automatically installed but after it has already been saved.

6. Restart your computer. This is a standard procedure for maintaining your computer after each program installation.

7. Insert your CD installer in your computer's CD/DVD-ROM drive.

8. Go to "Control Panel" and double-click on "Printers and Other Hardware."

9. Select "Add a Printer." The "Add a Printer Wizard" will guide your through your next steps. Select the name of the printer you want to use, and the computer will detect the printer you want to install. Click "Finish."

Tags: your computer, Canon PIXMA, file will, have installer, Install Canon, printer want

Use A Panasonic Fz50 Camera

Use a Panasonic FZ50 Camera

The Panasonic FZ50 digital camera offers 10.10 megapixels, 12X zoom and a 2-inch LCD monitor. This single-reflex camera weighs a little over a pound and a half. Geared toward the professional or serious amateur photographer, the camera comes with a Leica 12x zoom lens.

Instructions

1. Charge the battery before inserting in the camera. When the camera first arrives from the manufacturer, the battery is not charged. Snap the battery into its charger and plug into an electrical outlet. After the battery charges, open the battery door on the bottom of the camera and insert the battery.

2. Insert the SD Memory Card into the camera. Locate the memory card door on the right side of the camera.

3. Turn the camera on. Slide the on-and-off switch, on the top of the camera, to the right to turn on, and to the left to turn off.

4. Set the mode dial, a circular knob on the top of the camera, to "P" or "Auto" to take standard pictures.

5. Press the shutter button down to take a photograph. Find the button on top of the camera, to the far right, in front of the mode dial. Press halfway down, allow the camera to automatically focus on your subject, and then press all the way down.

6. Set the mode dial to the right pointing arrow to view the pictures you have just taken.

7. Set the mode dial to the motion picture icon to take videos. This setting is between SCN and CUSTOM.

8. Learn what the letters on the mode dial mean. You can control how the camera captures images by adjusting the mode dial. Some of the options are identified by a letter. P is for automatic exposure, A is to set the aperture manually, S is to set the shutter speed manually, and M is for setting the exposure manually. The camera icon with an A is for auto setting and recommended for beginners. (There are two A's on the mode dial, one with the camera icon and one without.)

9. Save preferred menu settings by setting the mode dial to CUSTOM.

10. Set the mode dial to SCN to bring up a selection of scene options. When choosing a specific scene, the camera will adjust the settings to best capture that image, considering its lighting and other factors. There are five scene menus. SCN settings include portrait, nighttime portrait, sports, soft skin, scenery, night scenery, panning, food, party, fireworks, candlelight, snow and starry night.

11. Choose a scene by maneuvering through the menu that appears on the LCD screen located on the back of the camera. Press the arrows near the round menu button, located on the back of the camera, to move through the menu. Press "Set" in the middle of the menu button to make your choice.

12. Flip the flash attachment up to use the flash. Look on the top of the camera for the flash.

13. Transfer images from your camera to your computer by hooking up the USB cord that comes with the camera from the camera to computer. Before downloading images for the first time, run the CD camera software on your computer. The CD should come with your camera. Another way to transfer images is to remove the memory card from the camera and insert it into a card reader connected up to your computer.

14. Refer to the user manual (see References) for additional features and controls.

Tags: mode dial, your computer, back camera, camera icon, camera insert, camera right

Set Up An Outlook Account On Windows Mobile

Receive email from all of your accounts in one place. Through the use of Outlook on your Windows Mobile powered device, you can send and receive emails through each of your accounts anywhere Wi-Fi or your cell service is available. Follow the steps in this guide to help stay productive on the go.

Instructions

1. Open the start menu on your PDA and then go the option labeled "Messaging." Click the 'Menu" button on the next screen and choose labeled "Tools," then select "New Account."

2. Enter the name of your email address that you would like to receive messages from into the field and then click "Outlook Wi-Fi." Click "next."

3. Enter your password into the field labeled "Password" (entering your name here is optional). Check the "Save Password" box and then click "Next."

4. Indicate the type of server your email account uses from the drop-down menu--chances are, you account will be a POP3. Click "Next." Entering the domain name is optional. Click "Finish."

Tags: into field, then click, Windows Mobile, your accounts, your email

Troubleshooting Crosley Cd Players

Troubleshooting Crosley CD Players

Disc Integrity

There are a variety of things that could cause you to experience problems with your Crosley CD player. The first thing you should always check if a CD skips or won't play at all is the CD itself. Dirt and scratches can cause the CD player's laser to be unable to read the information on the disc. Clean the disc using a dry, clean and soft cloth and attempt to repair any scratches with a CD repair kit. These kits can be purchased at any major electronics retailer.

The Laser

Another problem that could cause a Crosley CD player to function improperly is the unit's laser. If the laser gets any kind of dirt or dust on it, the laser will be unable to penetrate and will not be able to scan the CD. You can attempt to blow dirt gently off the laser, spray it with a can of compressed air, or purchase a DVD/CD laser cleaning kit. Once you've tried these things, give your CD another try.

Wall Outlet

If your problem is that your Crosley CD player simply won't turn on, make sure the wall outlet that you are attempting to plug it into actually works. It may sound silly, but not knowing a wall outlet isn't providing any power is actually a common occurrence. You could have blown a fuse and not known it, or the outlet itself could simply be wired wrong. Plug your CD player into an outlet that you know works and see if that helps the situation.

Tags: Crosley player, could cause, Crosley Players, outlet that, problem that, that could

Minolta Z3 Lens Will Not Retract

Cameras have different designs and features, but the underlying structure is similar. A stuck lens is a problem that can happen on most cameras. It is not specific to a Minolta Z3. Digital cameras with automatic focus can be prone to lens issues such as failure to retract. Fixing the lens requires you to troubleshoot the problem.

Reset the Camera

Setting the camera back to the factory defaults can sometimes cure odd little glitches. To do this, you need to remove the power source and the memory card. The battery compartment on the Z3 sits on the bottom side of the device. You will also find the slot for the memory card there. Once you open the door, remove both the batteries and card. Unplug the camera from the AC adapter as well. Leave all items out for a few minutes and then reassemble your camera. Turn it on and then off again to see if the lens retracts.

Batteries

Camera lenses that extend and retract automatically have a motor that requires power. Even if your camera turns on, the batteries may be too weak to work the motor. Installing a fresh set of batteries will boost the power. The Dimage Z3 takes four AA alkaline batteries. To ensure you get full power to the camera, replace all four at once. Once you have new batteries in place, turn the camera on to see if the lens retracts. If not, turn it off again. Powering down may trigger the lens to close. As an alternative, try plugging the AC adapter into the camera to power the motor.

Damaged Lens

The lens on a camera is sensitive to damage. If you have bumped or dropped the camera recently, examine the lens. The lens extension may appear crooked or out of place. This would indicate the lens has come off the track that moves it back and forth. If the lens appears out of place, grab it around the sides with your fingers and see if you can maneuver it back into position. Odds are that you will probably need to get service for your Minolta. There may be a crack or a piece broken that you cannot see.

Motor

The worse possible scenario is a burned-out motor. The Minolta Z3 is a mechanical device. As with all such devices, the parts can break down. If all other options fail, you'll have to take the camera in for service. A technician will be able to test the motor and determine if it needs replacing. A camera is a sensitive piece of equipment -- unless you are experienced at camera repair, trying to replace the motor on your own is not recommended.

Tags: camera sensitive, lens retracts, memory card, your camera

Install An Hdtv

Once you've researched the different types of HDTVs available on the market and chosen the right one, it's time to install it. Installation of a new HDTV can be tricky. If possible, have it professionally installed. If this is not possible, due to cost or lack of installers in your area, follow the instruction manual exactly.

Instructions

Install Your HDTV

1. Decide how you would like your HDTV to be broadcast. You can opt for an antenna signal, HDTV cable service or satellite programming. Depending on the method you choose, you may need to purchase additional equipment, such as a satellite dish, through your service provider.

2. Buy the right HDTV bundle. Depending on where you live and what type of HDTV service is available to you, your bundle may include such items as connector cables, tuner cards and antennas.

3. Remove your HDTV from its packaging and find the installation section of the owner's manual.

4. Mount your HDTV by using the proper wall mounts. Not all HDTVs come with wall mounts or stands, so you may have to purchase these items separately at a big-box electronics store or through your local cable provider.

5. Secure the HDTV antenna in the location recommended in the owner's manual.

6. Follow the instructions provided to install the tuner card for your HDTV. You'll need a PC that is relatively new to complete this task.

7. Find your coaxial cable and use it to connect the HDTV tuner card to your HDTV antenna.

8. Install the software that came with your HDTV. Setting up the hardware during installation will require manufacturer-specific instructions. Failure to follow those instructions will slow you down and may cause damage to your HDTV.

9. Call your cable company or satellite television provider to order an HDTV programming package. If you don't receive shows broadcast in high definition, there is no point in owning an HDTV.

10. Ask your HDTV provider if there are any installation specials being run. Many cable companies run installation specials as an incentive to get customers to switch to HDTV. An installation special may very likely include professional installation for a nominal fee or at no extra charge.

11. Call your provider to troubleshoot reception problems after you install your system or request that a technician be dispatched to install the system for you.

Tags: your HDTV, Call your, card your, card your HDTV, HDTV antenna, installation specials

What Are The Limitations For Setting Up Conference Calls

Limitations to conference calls include incompatible phones, background noise and long agendas.

Conference calls bridge the communication gaps across the miles. But at the same time, even modern technologies stumble over the limitations for setting up conference calls. These glitches include incompatible telephones and different levels of technical expertise among your audience members. Human ignorance also can impede the process of doing business via the telephone.

Equipment

Telephones that work best for conference calls are units with handsets that are hard-wired into the phone line, according to the Conference Call website. Mobile and cordless phones generate static and may also intercept noise from the communications airways. If you use a speaker phone, select a model that is full digital duplex, the Conference Call website advises. This style minimizes the clipping noises that sometimes are heard with speaker phones. It also allows multiple guests to speak at the same time. Conference calling gets kicked up a few notches when users introduce video and web-based features to enhance their meetings; however, this means additional technologies---such as shared software for uploading files---that can lead to additional stumbling blocks, according to the Bizcovering website.

Savvy

Another limitation to setting up conference calls is a lack of experience with the telephone equipment. For instance, always test your audio and visual equipment before every call. Otherwise, you will be troubleshooting while an impatient audience is waiting. Turn off your call waiting feature by dialing "70#" or contacting your service provider for instructions, according to the Conference Call website. The beeps that signify call waiting are similar to the tone that announces a new caller joining the conference. Remind your guests to use the "mute" button on their phone to prevent listeners from hearing background noises. Advise your audience not to use the "hold" function because the music is intended to notify a telephone caller that he has not been disconnected; however, that same music is audible to everyone on a conference call.

Etiquette

Etiquette is as important to the success of a conference call as having the right equipment and technological know-how. Join the call early and introduce yourself because guests may not recognize your voice, according to the Conference Call website. Another limitation to conference calls is that your guests may begin discussing your agenda topics before the entire group joins the call, which is another reason for you to dial in early. Leave ample time for your agenda and participants' comments. But remember that listeners become bored after more than one hour of conversation, according to the Bizcovering website. Also, conference call etiquette means factoring in time zone differences for your listeners. Conduct your call in a quiet area that is free from disruptions and background sounds.

Tags: Call website, Conference Call website, conference calls, according Conference, according Conference Call, according Bizcovering

Clean A Motorola Razr Screen

Most people love their Razr from Motorola. However, one problem users face is that the screen often gets dirty, especially after frequent use. In order to avoid damaging the Razr, you'll want to use caution when cleaning the screen and surrounding areas.

Instructions

1. Find a sewing needle to use to clean the small crevices. You'll want a needle with a sharp tip.

2. Remove the debris around the screen with the needle's tip. After you've made your way around the perimeter, you'll use the needle to lift the screen.

3. Wedge the needle under the top corner of the plastic screen. Gently lift to take the screen off of the Motorola Razr. Take your time in order to avoid damaging the screen.

4. Use a credit card to clean all areas around the screen. After sliding away the dirt, get a clean cloth. Take the cloth and apply enough pressure to wipe away the rest of the dirt.

5. Put the screen back on the Motorola Razr. Once you're finished cleaning the screen, you can easily snap it back into place by lining it back up and pressing down for a few seconds.

Tags: Motorola Razr, around screen, avoid damaging, cleaning screen, order avoid, order avoid damaging

Play Tetris On A Calculator

Tetris was created in 1984, but games using geometric figures composed of squares have been played for over 100 years.

Tetris, the popular video game that challenges players to fit puzzle pieces together into horizontal lines, is available on a range of video game platforms. One of those platforms is a common calculator. Many games are available on scientific calculators, but Tetris is available on most Canon calculators, even simple ones. The game requires just a few simple steps to activate.

Instructions

1. Find a Canon brand calculator.

2. Enter the code 153349 using the calculator's keypad.

3. Press the plus and minus keys simultaneously. Hold down for a few seconds to ensure the Tetris functionality is properly activated. When activated, the calculator's LCD screen will display "TETRIS."

4. Turn the calculator sideways so that the addition, subtraction and multiplication buttons are nearest you. Act quickly because Tetris pieces will start falling immediately.

5. Place your fingers on the addition, subtraction and multiplication keys.

6. Use the addition key to move the Tetris pieces to the left and the subtraction key to move them to the right. The multiplication key can be used to flip the Tetris pieces around.

7. Try to get a straight line across the bottom in order to clear rows of pieces.

Tags: Tetris pieces, addition subtraction, addition subtraction multiplication, subtraction multiplication, video game

Functions Of A Sony Digital Camera

Sony pitching its cameras at the Consumer Electronics Show.

Sony started working on its first digital camera in 1995 and the result was its Cyber-shot DSC-F1. It had an image resolution of 0.35 megapixels and an aspect ratio of 640-by-480 pixels. The DSC-F1 also weighed 280 g and had just enough memory for 30 to 100 photos. A lot has changed since then. At the time of publication, Sony's new cameras for 2010 and 2011 fall into four model ranges that deliver up to 16.2 megapixels while recording full HD video.

Cyber-shot H Series

Sony's H series is a hybrid camera class that combines elements of SLR (Single Lens Reflex) and point-and-shoot cameras. A few of Sony's new 2011 cameras are in this series and the main difference between them is the range of their zoom lenses. The most expensive camera has a 30x zoom while the others have 16x to 10x at the lowest price. All the cameras in this series have 16.1 to 16.2 megapixels, and only the lowest priced model lacks full HD (1,080 pixels) video recording. Other innovative functions in this series are the ability to take panoramic and multi-angle photos in a sweeping burst of frames and to use GPS to add location information to your photos.

Cyber-shot W Series

Sony's W series are their point-and-shoot cameras that have wide-angle lenses and good all-around performance. The cameras in this series have zoom lenses ranging from 7x to 4x, megapixel resolutions from 16.2 to 12.1 and video performance from 1080p (full HD) to 720p. The new 2011 cameras also have an Exmor R CMOS sensor that's twice as light sensitive as conventional ones so low-light photos have less noise and more detail. Sony also offers some unique automatic photo modes in this series, including 3-D panorama and multi-angle modes and a "Handheld Twilight" mode that takes six rapid-fire photos at different exposure settings and overlays them to minimize noise and maximize quality.

Cyber-shot T Series

The T Series is Sony's compact, thin line point-and-shoot category but what it lacks in size it makes up for in performance. These cameras are built to last, especially the new mid-priced TX10 that's shockproof to 5 feet, waterproof to 16 feet, dust proof and can withstand temperature extremes from -14 to 104 degrees Fahrenheit. The TX10 also boasts full HD video recording with a 50i mode that formats it for optimal TV playback and it comes with a 16.2 megapixel Exmor R sensor and a 25 mm wide-angle lens. The other new T Series cameras have a GPS and 3.5 inch OLED touchscreen (at the top of the line) and 3-D panorama and multi-angle modes but only 720p video and no Exmor R sensor (at the bottom).

NEX Series

At the time of publication, Sony claims that its NEX-3 and 5 models are the world's smallest interchangeable lens cameras. They're designed to have the picture quality of digital SLRs at half the size and weight. Both cameras have an Exmor APS HD CMOS image sensor that's 13 times bigger, and a lot more sensitive than the average sensor. In addition, the NEX-5 can shoot full HD video. But the NEX-3 is limited to a maximum resolution of 720p. The NEX-3 and 5 are also 14.2 megapixel cameras that use a BIONZ image processor to deliver the best possible results in all kinds of shooting conditions. You even get manual modes for maximum control and built-in shooting tips that tell you how lighting changes affect F-stop settings.

Tags: this series, cameras this, cameras this series, Cyber-shot Series, full video, Series Sony

Hook Up Sirius To A Stereo Home Receiver

Hook Up Sirius to a Stereo Home Receiver

After the merger with XM, Sirius has become the leader in satellite radio. Compared to terrestrial radio, the benefits are enormous. Vast numbers of channels and CD quality sound are just some of the many reasons why more people are switching to satellite radio. Although Sirius commonly is used in a vehicle, it also can be installed in your home stereo as well. By hooking up your stereo with Sirius, you will be able to experience the next generation of radio.

Instructions

1. Purchase a Sirius home stereo docking kit. These are different than the models used for vehicles and are compatible with most stereos. Sirius docking kits can be found in most electronics stores and online as well.

2. Plug the black mini adapter of the audio cable into the back of the docking cradle. Take the other end of the audio cable and plug the white and red adapters into the back of your stereo.

3. Plug the AC adapter into the back of the docking cradle. Plug one end of the AC power cord into the power brick. Wait until the completion of installation before plugging the power cord into an outlet.

4. Plug the antenna into the back of the docking cradle. Set the lock lever on the back of the docking cradle to "Unlock." Insert the radio receiver into the docking cradle, then set the lever to "Lock." Plug the power cord into an outlet, then press and hold the power button to turn on the receiver.

Tags: docking cradle, back docking, back docking cradle, into back, cord into, into back docking

Panasonic Hvx200 Tutorial

Learning use Panasonic AG-HVX200's basic functions will allow you to experiment and learn more technical uses and controls with the camera. It is a professional video camera that shoots in HD and features many components. First-time camcorder users and even experienced users might have a tough time learning all the basics of this device. There are dozens of different settings that you can experiment with to create custom shots and professional footage with the camera.

Instructions

1. Flip open the LCD screen and press the "Power" button to turn on the camera.

2. Insert a P2 card or mini-DV tape into the back of the camera. A P2 card is ideal for recording high-definition video. At least 32 GB are needed on a P2 card to record around an hour of video footage. Mini-DV tapes can record an hour of standard footage onto a single tape.

3. Use the LCD screen to frame your shot. If it is a bright area, or you are more comfortable, you can also look through the camera's viewfinder. Click the "Menu" button on the top of the camera. The menu loads on both the LCD screen and the viewfinder for easy access.

4. Slide the camera to "Auto" to record in automatic. Press the red "Record" button on the right side of the camcorder next to the hand grip.

5. Press the "Record" button to pause the recording. On top of the hand grip, there is a small slider known as the "Record Check" button. Press this button up to watch a quick preview of the last scene that was shot.

6. Use the camera's zoom function four different ways. Use the finger zoom buttons above the right-side handle. Use the zoom buttons on the top handle of the camera. Use the zoom buttons on the camera's remote control. "T" zooms in; "Z" zooms out. You can also flip the zoom-ring switch to "Manual" and move the zoom ring to the right to zoom in or to the left to zoom out.

7. Insert a three-pin XRL microphone connection to the right-front side of the camcorder. The top port is "Channel 1" while the bottom port is "Channel 2." On the inside panel of the camera, select the proper XRL input to choose the audio input you want to use.

8. Flip the "Auto/Manual" switch to "Manual" to operate in manual mode. Use the "Focus" ring to set the focus up for the footage. Press the "Auto Focus" quick button to do a quick focus. You can also switch the focus to "Auto" while still keeping everything else in manual settings.

9. Flip the camera operation switch to "Media" to playback video files. On the LCD screen, a selection of thumbnails appears that represents the clips already recorded. Use the arrow selection buttons to scroll through the different clips. Press the triangle "Play" button to play a clip on the screen.

10. Highlight a clip and press the "Square" icon to delete the clip. Press the button again to confirm the deletion.

Tags: zoom buttons, camera zoom, hand grip, port Channel, Press Record, Press Record button, Record button

Insert A Sim Card

SIM (short for Subscriber Identity Module) cards come in very handy. You can choose to store phone numbers, addresses, and even text messages on it, thus making your personal contacts and other information transferable when you decide to get a new cell phone.

Instructions

1. Make sure your SIM card will fit your phone. Many SIM card have the company's logo with which they are affiliated. If your card has a logo that doesn't match the one on your phone, it might not be the right model. Speak with your service provider if you can't seem to get it to work.

2. Take the back off your phone. Usually, there's a release button of some type that you have to press in, to allow the back to slide off. Look carefully, because it's not as obvious on some phones as it is on others.

3. Remove the battery from your phone, and set it aside with the back plate.

4. Place the SIM card into the appropriate cavity (there's usually only one) by sliding it in beneath the little metal bar. Make sure the side with the visible part of the microchip is facing down. Sometimes, companies make it easier by writing "This Side Up" on the SIM card.

5. Replace the battery in the phone and slide the back plate on.

Tags: your phone, back plate, Make sure, your card

How Do Satellite Receivers Work

Before It Gets There

The satellite receiver, which sits in your home and connects to your TV to bring you the satellite image, is the last step on a very long trip for the satellite signal. It starts with the arrays at the satellite company itself, which beam an encoded signal up to the satellite. The satellite them beams the signal back down to the dish on top of your house. That process keeps the signal clean because there are no land-bound obstacles to interfere with it. The dish reflects the signal to the LNB array on the end of the extruding arm. LNB stands for "low noise block;" it both amplifies the signal and filters it into frequencies which your receiver can read. From there, it goes to the receiver itself, to begin the final stage of the process.

The Receiver's Job

The receiver's primary job is to interpret the satellite signal into a form you can view and control. The decoder chip inside of it decrypts the signal. The encryption s in place to prevent those who haven't paid for the service from accessing the signal. Then the receiver decompresses it: most satellite companies use MPEG signals, which are compressed and need to be "opened up" before your television can view them. After decompression, it converts the singal into a readable form; in the U.S., this usually means NTSC (National Television Systems Committee) format, though it can also entail digital and high definition formats as well. The particulars depend on your satellite dish. Finally, it splits the signal into different channels which the receiver lets you access by tuning to the part of the signal containing the channel you want. Whenever you change channels on the receiver, you're simply accessing another part of the signal.

Additional Duties

While interpreting the signal is the receiver's primary job, it also has a host of other features. It periodically makes calls to your satellite company, letting them know whether you've purchased anything on pay-per-view and similar details while receiving software upgrades when necessary. It also accesses a signal containing programming information, which lets you view the broadcast schedule directly on your screen. Many of them also contain DVRs (digital video recorders): hard drives which record programs as digital information and let you play them back when you're ready to watch them. DVRs let you pause and rewind live broadcasts as well, creating your own instant replays.

Tags: part signal, receiver primary, satellite company, satellite signal, signal containing, signal into, your satellite

Instructions For The Promaster 7500edf Digital

The 7500 features an automatic TTL range of 2 to 99 feet.

Promaster's 7500EDF digital electronic flash was released in 2005. Its features include a recycling time of 0.3 to 10 seconds (depending on battery strength), flash duration capabilities of 1/30,000 to 1/1,000 of a second, a swiveling head with a bounce angle range of -7 to 90 degrees, a swivel angle range of 0 to 180 degrees, and a motorized power zoom to focal lengths of 24, 28, 35, 50, 70, 80/85, and 105 millimeters. The flash weighs 17.2 ounces and comes with a push-on plastic diffuser.

Instructions

1. Insert four AA batteries into the left side of the flash (if you're holding it from behind). Open the battery cover by pushing it with your thumbs, and slip in the batteries in compliance with the polar indicators. Put the cover back on. Flip the On/Off switch (the switch on the back of the flash to the bottom left) to turn the flash on.

2. Manually use your flash by first slipping the flash onto the camera shoe (Nikon, Pentax, Sony, or Canon). Set the camera shooting mode to Manual and the flash's mode to 'M' (push the second button from the bottom right until 'M' appears on the display). Push the M/Freq button (located just under the display, 3rd button from the left) to select the desired flash output level (1/1, ½, ¼, 1/8, 1/16, 1/32, or 1/64 M). Set the camera shutter speed to X-sync or slower, set the lens aperture, and then take the picture.

3. Push the mode switch and select TTL Auto Flash to make the camera and flash act automatically in conjunction with each other. A Canon, Sony and Pentax will fire a pre-flash before the actual real flash, so that the camera can evaluate the subject. A Nikon will expel a bunch of little flashes for the same reason, making ambient light less of a factor in the picture.

4. Select Multiple Flash Operation with the mode selection button to fire multiple flashes in succession to capture subject movement in a single picture. After selecting Multi, select Rept and choose the number of flash bursts. Press the M/Freq button to specify the frequency of the bursts, and adjust the camera's shutter speed and aperture settings.

5. Use Model Flash mode to help determine what the image will look like due to the position of the flash. Slide the Sub-Reflector switch to the "flash" position. Switch the flash mode to Model and press the M/Freq button to set the frequency of the flash. The H-F setting (High Frequency) is ideal for close-up pictures and features low-power bursts. The L-F setting (Low Frequency) is good for large subjects and features strong flash bursts.

Tags: Freq button, angle range, angle range degrees, button from, camera shutter, camera shutter speed, flash bursts

Diy Camera Light Ring Flash

Making a ring flash is relatively easy with simple materials and some patience.

Camera ring flashes, when purchased from a store, can be very expensive. The goal of a ring flash is to provide diffuse lighting from the area surrounding the front element of a lens. Ring flashes are useful for portraits and macro photography, when even front lighting is necessary. Fortunately, you do not need to spend a lot of money on a flash for your camera. With household materials, you can build your own camera ring flash using this inexpensive method.

Instructions

Prepare the Milk Jug

1. Ensure your milk jug is entirely cleaned and dry before you begin to cut it apart. Thoroughly rinse the inside and outside of the jug with warm water and mild dish soap. Dry it completely. Special caution should be taken not to use wet plastic near your camera's lens as it could damage the equipment; it may help to wait overnight to let the plastic completely dry.

2. Locate the flattest area of your dry milk jug. Draw a circle approximately 6 to 8 inches across. Using scissors, cut out the circle.

3. Place your lens facedown in the middle of your plastic cutout. Using a permanent marker, trace the edge of your lens onto the plastic.

4. Cut out the traced hole using scissors. Ensure you have removed all loose bits of plastic.

5. Fit the ring around the end of your lens. Secure the ring to the lens using a thin line of masking tape on the side facing the photographer.

6. Test the efficacy of the ring flash by enabling the built-in flash on your camera. Point the camera at a wall at a distance of 3 feet and take a picture. If light is dispersed relatively evenly in the shape of a circle, you have built your ring flash correctly.

Tags: ring flash, your camera, your lens, flash your, flash your camera, your milk

Test Your Graphic Card

Graphics cards support games and other applications used on a computer.

Graphics cards, specialized processors that render 3D graphics from the microprocessor, enhance the quality of computer graphics. Several programs are available online to check the quality or compatibility of your graphics cards and help you determine how well your graphics card works.

Instructions

1. Run a 3-D game. Most games have a video test under the option menu. This determines whether or not your gaming system or computer has adequate performance capacities to support the game. The performance is measured in FPS or frames per second. The higher number of frames per second equals a better quality picture and speed of the graphics.

2. Test the FPS with a third party software during your game play. An example of a free program that can be downloaded from the Internet is FRAPS. FRAPS displays the FPS when you are playing the game. This will give you the most accurate FPS since the count will occur during game play.

3. Run FRAPS. Start your game. Play normally with the settings you prefer. Yellow numbers will appear on the bottom right corner of the screen representing the current frames per second provided by FRAPS.

Tags: frames second, game play, Graphics cards, your game, your graphics

Clean And Preserve 16mm Film

Movie buffs know that 16mm film reels are a rare commodity. While some Eastern European companies still produce the material, it is falling largely out of use in the commercial film industry and has all but vanished from home collections. Proper cleaning and lubrication is essential to the preservation of a precious 16mm film reel. It is not necessary to clean and lubricate a film reel every time you watch it, but you do need to properly repackage it and seal it up every time the seal on the package is broken.

Instructions

1. Put cotton gloves on--this will help to reduce any spotting or grease buildup on the film from your hands.

2. Set the reel of film up on a hand-winder, with an empty reel on another hand-winder nearby. Thread the end of the film leader into the empty reel and crank until the first portion you would like to clean comes up.

3. Spray a light film of Goo Gone onto a clean, dry all-cotton cloth and gently wipe both sides of the film. Follow up with another dry cloth--no Goo Gone this time--to make sure that you haven't left any liquid behind.

4. Work your way through the entire reel. Clean and dry one section, then crank with the hand-winders until another section comes up.

5. Crank the winders in reverse so that you are spooling the film back onto the original reel. As you go, gently buff the film with a silicon-treated film polishing cloth. This will lubricate the film and help to preserve it.

6. Remove the film leader from the now empty extra reel and wind it around the full reel. Carefully remove the full reel from the hand-winder, close it and cover it.

7. Place Kodak molecular sieve packets in the film container, about three packets per 2000-foot roll of 16mm film.

8. Seal the film container with moisture-proof tape or place it in a sealed plastic bag.

Tags: 16mm film, empty reel, every time, film container, film leader, film reel, full reel

Remove An Infrared Filter On A Digital Camera

Infrared filters produce surreal photographic results.

Infrared filters are typically used in monochrome (black and white or sepia-toned) landscape photography to provide intriguing or unusual results. In landscape photographs made with the help of an infrared filter, highlights such as bright horizons become dark and shadows or dark areas such as foliage take on a luminescent glow. Most filters can be used with both film and digital camera outfits, and installation as well as removal of the accessory is simple.

Instructions

1. Remove the lens from the camera body. This is done by depressing a small release tab near the lens mounting threads and rotating the lens counterclockwise.

2. Locate the infrared filter. It will be attached to the front of the lens. Most filters will have the manufacturer's name and other information about the filter printed along its edges.

3. Grasp the edges of the filter with one hand while supporting the camera lens with the other. Turn the filter counterclockwise until it loosens from the lens. If the filter is stuck, apply a very small drop of lighter fluid to the seam between the filter and lens.

4. Remove the filter. Wipe clean the edges and thread with a microfiber cloth. Clean the glass with a lens tissue. Store the filter in a clean case or carrying pouch until next use.

Tags: Infrared filters, Most filters

Outdoor Film Schools

Outdoor film schools teach students document wilderness and outdoor adventures.

Many film students have dreams of becoming a successful Hollywood filmmaker, whether it be in the top capacity of producer or the lower-rung capacity of cameraman. However, not everyone who is thinking about film school wants to go the conventional route; some students have ambitions of a more off-the-beaten path. Outdoor filmmaking offers an opportunity to learn about wilderness and adventure documentation in the tradition of Jaques Cousteau or Mutual of Omaha's Wild Kingdom. As of 2011, only four schools in the United States and Canada are specifically for teaching about outdoor film techniques.

Outdoor Video School

The Outdoor Video School (outdoorvideoschool.com) is located in Oneonta, Alabama, and offers both an outdoor video course and a home study course. The Outdoor Video Course is given at the Thunder Mountain Lodge and Preserve, which caters to hunters of deer, quail and pheasant. It's a four-day course that costs $1,275, as of 2011, and includes tuition, registration, room and board, books and other class materials. The Home Study Course offers DVDs and CD-ROM software and costs $59.95, which includes shipping and handling.

Outside Adventure Film School

The Outside Adventure Film School (adventurefilmschool.com) is based in Boulder, Colorado, and was established in 2007 on Mt. Kilimanjaro in Tanzania. This school serves as an on-location experience where the outside setting serves as the film laboratory. The school offers courses in various locales as diverse as Richmond, Virginia, and Machu Picchu in Peru. Each course offers opportunities for students to film adventures such as extreme sporting events and expeditions with course prices as of 2011 ranging from $499 to over $2,000, depending on the length of the course and its location.

Peter Peru's Extreme Film and Expedition School

Peter Peru's Extreme Film and Expedition School (explorex.net) offers a program with a focus on filming the winter sports of skiing, snowboarding and mountaineering. Students learn about film theory, conception, preproduction, production, postproduction, distribution, marketing and fundraising. This week-long course is not for everyone, though. Participants must have at least upper-intermediate skills in skiing and snowboarding, and must be between the ages of 18 and 36 years old. Peter Peru is an award-winning filmmaker who is a member of the Directors Guild of Canada.

Rack Focus Outdoor Multimedia

This video school is offered by Rack Focus, which is a production company that specializes in outdoor media. They teach students outdoor film by walking them through situations that simulate whitetail and turkey hunting. This hands-on exercise is followed by a written exam. Video, audio, interviewing and production techniques are taught. This two-day course costs $1,250, as of 2011, which covers food during course hours, a course packet, a Rack Focus shirt and hat with decal and a Course Certification Diploma. The company is based in Midland, Michigan.

Tags: Outdoor Video, Peter Peru, Rack Focus, about film, Adventure Film, Adventure Film School, costs 2011

The History Of Camera Lenses

Camera lenses are usually made of several optical lenses.

Camera lenses work in much the same way as the human eye, focusing an image and transmitting light, color and shape to the camera itself. Lenses are usually made from optical glass, but may also be made from plastic. The important thing is that they focus light rays. It took a long time for the camera lens to develop from its simplest form to the type used in modern cameras.

Types

Most "point-and-shoot" cameras use a general-purpose lens with a standard focal length designed to mimic the way the human eye sees an image. This isn't the only type of camera lens, though. Special-purpose lenses are often used with advanced cameras. For instance, the telephoto lens is designed to make distant images come closer, and works much like a telescope. Panoramic lenses can take wider pictures, and are useful for scenery, while fish-eye lenses enlarge the central part of the image, compressing details on the edges. Many cameras also have a zoom lens, which can be used to get a closer view of a distant subject.

History

The modern camera lens was developed from other optical lenses used for magnifying and vision correction. Before the development of these lenses, the only type of camera available was the camera obscura, or pinhole camera, which made a fuzzy image that worked only in dark rooms. By the 16th century, the telescope lens had been developed, making possible the camera lucida--a type of projector. In 1611, Johannes Kepler described single and compound lenses and experimented with grouped lenses. The fast aperture portrait lens was developed in 1841, and by the early part of the 20th century, fast, sharp camera lenses were developed. Modern camera lenses are still very similar to these.

Technology

Lens-coating technology has made higher-quality camera lenses possible. Coated lenses mean less reflection and better light transmission. The addition of computer calculation now allows much more precise lens-making, as well. Modern camera lenses may still be essentially the same as earlier ones--a curved surface with a specific focal point--but that focal point is now much more precisely calculated.

Production

Modern camera lenses begin with a design, chosen based on the type of photographer the lens will be marketed to. Many camera lenses are actually made up of many individual glass lenses, each chosen for the way it bends and focuses light. These individual optical lenses are called lens elements, and make up the camera lens itself. They may be made of different types of glass and have different coatings. After the design comes prototyping, where a version of the camera lens is made and tested under all kinds of temperatures and conditions. If the prototype passes these tests, it can be put into mass production.

Considerations

Historically, photographers have needed to pay attention to the type of lens they use and the way it is adjusted. With the development of auto-focus lens sets for modern point-and-shoot cameras, it's easy to avoid thinking about the way a camera works. These cameras don't provide the control of a SLR (single lens reflex) camera, though. Serious photographers may wish to invest in a variety of different lenses and a camera of this type to get the most out of their pictures.

Tags: camera lenses, camera lens, Modern camera lenses, optical lenses, Camera lenses, camera lenses still, lens developed

Increase Battery Life Of A Palm Tx

The Palm TX has shown a good deal of improvements among the handheld circuit. Unfortunately, however, a lengthened battery life is not one of them. Palm states that the Palm TX should last through 5 days of normal usage. The only problem is, their definition of "normal usage" translates to roughly 40 minutes per day and does not consider the more power-consuming uses a handheld entails. This article will help you to increase the battery life of a Palm TX as much as possible.

Instructions

1. Make sure your screen cover is not too tight. One of the TX's most boasted features is its big beautiful screen, but constant pressure on it can drain the battery quickly.

2. Use discretion when using the Palm TX's Bluetooth or Wi-Fi features. These devices are nice to have, but use significantly more battery than normal usage.

3. Keep the sound levels low, given that it is not necessary to listen to your handheld at a high volume. When listening to mp3s, the Palm TX will typically last for 6? hours of straight usage.

4. Stop usage of any processor-accelerator applications, such as Afterburner. These devices are programmed to make your handheld run hotter and faster than designed to, and can potentially damage and reduce the battery life of your TX.

5. Turn off any applications that are keeping your TX on at night. Some applications keep your handheld on when it would normally turn itself off. Turning these applications off will dramatically save battery power.

Tags: battery life, normal usage, your handheld, These devices

Restore Damaged Polaroid Photos

Polaroid cameras produce single images.

A Polaroid photo damaged due to rips, wrinkles or water spots can be a frustrating situation because Polaroid film produces no extra prints. Unfortunately, there is no way to repair the photo directly. By using a scanner and some digital photo editing techniques, however, you can print a new photo that will be as good as new.

Instructions

1. Make sure you have your scanner set to the proper photo setting (color or black and white) and that it is set to scan on the highest resolution. This will vary on different scanners, so refer to the scanner's manual if you are unsure do this.

2. Scan the photo into your computer as a JPG file.

3. Open the photo in your editing software and save it as a new file name so that you won't have to scan the photo again if you make a mistake.

4. Select the clone or rubber-stamp tool. It is usually shown in the tool bar as a small, stamp-shaped icon.

5. Set your cloning point to an area of the photo that is similar to the spot you are trying to repair. For example, if a photo has a rip on someone's blue jeans, set your cloning point to an undamaged spot on the jeans that is closest in appearance to what you are going to be repairing.

6. Click on the spot you are repairing. This will "stamp" an exact copy of the area you selected onto the spot you are repairing.

7. Repeat Steps 5 and 6 until you have completely covered the spot you are repairing.

8. Print the photo to make sure the printed results are satisfactory. You may need to do additional touch-ups if you catch errors after printing.

Tags: spot repairing, cloning point, photo that, This will, your cloning

Put Paper In An Hp Printer

Put Paper in an HP Printer

Hewlett-Packard, or HP, is a company that makes consumer electronics such as laptop and desktop computers, calculators and small hand-held computers known as PDAs. Another consumer electronic that HP is known for is the printer. Hewlett-Packard makes inkjets, deskjets, all-in-one and photo printers. None of these printers, however, will be any use to you if you can't load them with paper.

Instructions

1. Open up the front door of the printer, which serves as the paper tray. This door snaps shut so you will have to pop it open to fold it down.

2. Pull the swinging arm that is tucked inside the paper tray out and flip up the small flap at the end of this arm. This arm and the flap at the end will stop your printer paper from falling onto the floor when you print something.

3. Take a stack of paper that is 1/2 inch to 1 inch tall and gently tap one of the short edges of the stack on a flat surface, such as the top of a desk, until the opposite short edge of all the individual sheets of paper appear to be lined up. Next, tape on of the long edges of the stack of paper until the opposite long edges of all the individual sheets of paper appear to be lined up.

4. Lay one end of your printer paper stack on the paper tray, with a short edge facing into the printer. Line the stack up with the tab on the right hand side of the paper tray that appears right before the opening to the printer. Push the stack of paper forward until you can no longer push it forward without forcefully jamming it into the printer.

5. Move the sliding tab on the left side of the printer that you see, right before the opening to the printer, right up to the left edge of the stack of paper. Turn your printer on, if it is not already on, and you are ready to print.

Tags: stack paper, paper tray, your printer, your printer paper, appear lined, before opening

Dodge A Blue Shell In Mario Kart Wii

In Mario Kart Wii, Nintendo's popular racing game, blue shells are one of the most devastating items. When released, the blue shell will lock on to the player in first place and dive downward, creating an explosion that will spin out the first-place driver and any other drivers nearby. This guide will explain avoid being hit by a blue shell using a mushroom.

Instructions

1. Have a mushroom item ready while you are in first place. Since blue shells attack the player in first place, having a mushroom at the right time is half the battle. The chances of picking up a mushroom item while in first place is very low, but getting them in second or third place is common. If you get a single mushroom item, try to get into first place without using the item, and save it for later. If you happen to get a triple mushroom, try to use a couple of the mushroom boosts to get into first place and save the last one.

2. Wait till a blue shell item is used. You will know it is coming by the dinging audio cue that you hear whenever a hostile item is approaching accompanied by a blue shell icon on the screen.

3. Use your mushroom the instant before the blue shell dives down and explodes. When a blue shell deploys, it will come onto your screen and hover above your head for a second, then swoop up, and finally down before it explodes. Wait as the blue shell appears and circles around, and as the shell swoops upward, use your mushroom. If timed properly, the burst of speed you gain from the mushroom will send you zooming ahead of the blue shell's explosion unscathed.

4. It is possible to avoid a blue shell by driving over a mushroom laying on the track as well. When players have unused mushroom items, and are spun out by certain items, their mushrooms will scatter around on the ground. If you happen to see one laying around, you can attempt to drive over it to avoid a blue shell, by hitting the mushroom the instant before the blue shell dives down to explode. Though extremely situational and difficult to time, if done correctly a stray mushroom can win a race.

Tags: blue shell, first place, mushroom item, avoid blue, avoid blue shell, before blue, before blue shell

Use A Canon Powershot Series Camera

The Canon PowerShot Series of cameras are easy to use, with point-and-shoot technology. They are excellent for beginners because of this. However, they also have a great range of manual override controls for the amateur artist who is learning to experiment with his photography. You can choose from literal point-and-shoot mode, different automated modes that allow the user some control, or a fully manual mode.

Instructions

1. Open the bottom latch of the camera. Make sure you have batteries and a memory card in place, then close the latch.

2. Turn the camera on by pushing the power button on the top of the camera.

3. Choose the auto setting if you are a beginner. Simply line up the green Auto line on the top dial with the Shooting Mode indicator line.

4. Use the optical viewfinder or the LCD display and the zoom controller to frame your picture.

5. Press the big round button on the right side of the camera with your right index finger. This will snap your shot onto the camera's memory card you loaded in Step 1.

6. Experiment with the different modes once you become more comfortable taking pictures. Many of the cameras in the Powershot Series have more than 20 modes. Have fun trying different things out. Once you have some experience under your belt, you may want to try shooting some pictures in the fully manual mode.

7. Use the menus and buttons on the back of the camera to edit, share and print your photos. Alternatively, you can use a USB cord to connect the camera to your computer, or remove the memory card and insert it into a digital card reader on you computer, to transfer the pics to your Mac or PC and edit, share and print your pictures from there.

8. Buy some accessories, like add-on lenses, external slave flash, underwater case, or tripod to enhance your photography.

Tags: memory card, edit share, edit share print, fully manual, fully manual mode

Troubleshoot A Pentax Optio M30 Camera

The Pentax Optio M30 is a 7.1 megapixel digital point-and-shoot camera with a 3x optical zoom and face-recognition autofocus technology, making it much easier to take snapshots of your friends while out and about. It also has high ISO settings that make getting shots in low light situations much more likely. The M30 is PictBridge compatible, so you can print photos directly from the camera to PictBridge-equipped printers. You can troubleshoot minor problems with the M30.

Instructions

1. Charge the battery fully on the charger and make sure is inserted properly, with the positive and negative contacts aligned, if the camera doesn't turn on.

2. Disconnect the camera from a computer, printer or TV if there is no image on the LCD screen. Bright sun also can make it hard to see images on the LCD, so take the camera into a shaded location and look at the LCD again.

3. Insert a new memory card or format the existing one if depressing the shutter doesn't take a picture. Before formatting a memory card, make sure you have downloaded all the pictures you want to save.

4. Move closer to the subject and refocus if the image is dark or blurry; you may need better framing to get the right shot.

5. Press "Menu," then press the right arrow, then press the down arrow and check the USB connection settings if the camera won't print to a printer or if images can't be downloaded to a computer. You have to set it to "PC" for a computer connection and "PictBridge" for direct printing.

Tags: make sure, memory card, Pentax Optio, then press

Build A Crystal Radio Circuit

Build a radio that needs no artificial power source. You use the natural power of radio waves to power your radio, and you can easily construct your own homemade radio in your home, office or backyard. Challenge yourself to pick up weak signals with the simplicity of your homemade crystal radio circuit. With just a few handmade parts, create your power-source free radio and erect an antenna to power your radio and receive radio wave signals.

Instructions

1. Turn your cylinder container so that the open side is facing you. You can use a poster holder, paper coffee tube, oatmeal container or other nonmetallic tube for this.Poke two holes in the container about 1/2 inch down the length. Insert your wire through the right hole. Run the wire back through the left hole. Allow at least 1 foot of wire to protrude from the side of the cylinder container.

2. Tape the inner wiring to the inside of the cylinder container with electric tape. Wrap the protruding wire around the cylinder container five times.

3. Carefully strip some of the shielding from the coat of the wire, about 1/2 inch. Twist the bare wire into a loop with a twist near the insulation of the wire. The result will be a twisted wire with a loop protruding out from the side of the cylinder container.

4. Continue to wrap the wire around the cylinder container five times. Strip the wire again, at about 1/2 inch, and twist the wire into a loop. Repeat this procedure until you have 40 turns.

5. Make two holes at the base of the cylinder container, and insert the wire into one hole. Allow a foot of the wire to protrude out of the second hole. Secure the inside wire with electric tape.

6. Build your ground wire. Hammer a metal rod 2 feet into the ground outside. Tie one end of 100-foot wire to the metal rod, and stretch the other end up, tying it to a tree or something high up in the air. Avoid power lines, and do not use this device during lightning storms.

7. Set your cylinder container in the center of a square board of plywood. Make sure you have enough room for other components to fit onto the wood.

8. Place four Fahnestock clips on the board. Mark their locations on the board with a pencil, then drill holes over these marking points. Attach the clips to the board by using the provided screw that came with the clips.

9. Grab the protruding wire from the top of the cylinder container and tie it to the furthest clip on the plywood board. This clip is where you will hook up your antenna when you have completed your assembly.

10. Grab the protruding wire from the base of the cylinder container and tie it to one of the other clips on the board. This is your clip that leads to grounding wire. Run a portion of the wire to the adjacent clip, which will contain your resistor and partial connection to the earphone.

11. Attach your resistor between the third clip, the grounding wire clip, and the last clip. Connect the diode to the fourth clip on the board. Attach the protruding end of the diode to a screw and drive it into the board with a power screwdriver/drill. Leave enough space between the screw and the board to allow for wrapping your next wire hookup.

12. Take a new shielded wire and strip the ends at about 1/3 to 1/2 inch with a pair of wire strippers. Wrap one end of the wire around the screw that is connected to the diode. Run the other end of the wire into an alligator clip and squish the connection between the naked wire and the clip with a pair of pliers.

13. Wrap one of the wires from the ceramic earphone to the resistor clip, and run the other wire to the diode clip. Secure the connection by twisting the wires. You do not need to solder the parts. It is easier to repair broken or burnt-out diodes if you do not solder them. Just wrap all of your wiring for simplicity.

14. Connect the alligator clip’s teeth to one of the loops protruding out of the cylinder container. Make sure to connect your alligator clip to one of the loops near the middle of the cylinder container.

15. Hook up the antenna to the antenna clip. This is the first Fahnestock clip that you mounted on your board. Connect the other end of the antenna wire to a high place, such as a light pole or tree.

16. Place the ear piece in your ear to listen for a signal. Turn off your radio by disconnecting your antenna. It is that simple. No power supply is needed.

Tags: cylinder container, about inch, wire into, alligator clip, clips board, protruding wire

Instructions For A Disney Flower Personal Dvd Player

Understanding how a portable DVD player operates could change the device from becoming another dust-collecting electronic to a daily form of entertainment in your home. The vibrant colors and stylized design of the Disney Flower personal DVD player may make it look like an easy device for children, but there are a few important things owners should consider when using and maintaining the device.

Charging

The Flower Personal DVD Player comes with a charger for the built-in batteries. Plug the charger in and charge the battery for at least 8 hours to get the best life out of the battery. If you are using the DVD player at home, operate it with the charger plugged in to save wear and tear on the battery.

Discs

Insert a disc on the DVD tray, label side up. The DVD laser is exposed while inserting discs, so make sure that you do not touch or get anything on the laser to prevent damage. Play other types of discs like CDs, burned DVD discs and picture slideshows because the Disney Flower personal DVD player is compatible with all those types.

Watching

View the DVDs on the LCD or use the device's output jack to watch media on a television. Insert the plug into the output jack on the DVD player and connect the RCA plugs into an input on a television or cable box. Find the right source on the television and view the disc.

Listening

The DVD player features built-in speakers, but if they are not loud enough, you can use a headphone jack to listen to audio. For more volume, connect speakers through the headphone jack and adjust the volume through the speakers. Any speakers with a mini-plug connection will work with the portable DVD player.

Cleaning

Clean the LCD screen with a microfiber cloth to get rid of dirt, dust and fingerprints. Use a DVD lens cleaner disc to clean the actual DVD player. The lens cleaner is a disc with small brushes that cleans dust and dirt off the laser lens. Do not use any liquids to clean the DVD player because it could damage multiple components.

Tags: Disney Flower, cleaner disc, Disney Flower personal, Flower Personal, headphone jack, lens cleaner

Benefit From Titanium Bracelets

Benefit from Titanium Bracelets

Magnetic Therapy has ushered us into a world in which "beautiful" may also be "healthy." With the use of attractive jewelry, people can get pain relief while looking their best. The answer lies in a safe, non-invasive method of applying magnetic fields to the body for therapeutic purposes.

Instructions

1. Relieve pain with titamium bracelets. Titanium bracelets are often worn as a cure for carpel tunnel syndrome. One theory is that, when magnets are applied to a painful area of the body, the nerves in that area are stimulated, thus releasing the body's natural painkillers. Another theory maintains that when magnets are applied, all the cells in that area react to increase blood circulation, ion exchange, and oxygen flow to the area.

2. Heal your body faster. Titanium bracelets are a type of local anesthetic as well as a healing compound, because wearing a local ornament containing titanium assists in speeding up the body's own immune system. Utilizing the proper application of negatively charged magnets in contact with the relevant part of the body heightens the body's instinctive power to mend quicker and reinstate a natural healthy state.

3. Use titanium bracelets for their potent anti-inflammatory properties. The application of a magnetic field to an injured area helps restore the normal electromagnetic balance. This relaxes capillary walls, as well as surrounding muscle and connective tissues, allowing for increased blood flow. More oxygen and nutrients are transferred to the injury site, while pain and inflammatory-related electro chemicals are more efficiently removed.

4. Fight infections. Titanium bracelets are worn for the same reasons of other magnets. General uses include the ability to fight infections.

5. Boost Energy levels. Magnetic therapy dates as far back as the ancient Egyptians. Magnets have long been believed to have healing powers associated with muscle pain and stiffness; lodestones on the body, just as titanium bracelets on the wrist, were worn to correct unhealthy imbalances in the flow of "qi," or energy.

Tags: magnets applied, that area, that when, that when magnets, Titanium bracelets, when magnets

What Is A Mini Jack

TRS connectors, or mini jack connectors as they are commonly called, are one of the most popular audio connectors on the market. Originally designed for telephone exchanges, mini jacks are used in products ranging from electrical guitars to headphones for pilots.

Mini Jack

A mini jack is an audio connector. It is one of the most common types of analog connectors. The technical name of this type of audio jack is a TRS connector which stands for tip, ring, sleeve. Other common names are phone jack, stereo plug, and mini-stereo.

Versions of a TRS Plug

A mini jack has a cylindrical shape and three contacts or conductors. These contacts are located on the tip, ring and sleeve, explaining the name. Four and five contact versions are also available The four conductor version is often used as an output on camcorders. They also are used on laptop computers.

TRS Sizes

Modern TRS connectors come in three sizes. The 1/4" inch model is the original version, developed to work in phone exchanges. A 3.5mm and 2.5mm version is also available. These sizes were originally designed for use with transistor radios. They are now commonly used with MP3 players such as the Apple iPod or Sony Walkman.

Tags: also available, mini jack, ring sleeve

Unlock A Canon Sd Memory Card

Unlock a Canon SD Memory Card

Digital photographers use SD memory cards to store and transport digital image files. These cards come with a function that allows you to lock them so that no further data can be written to the card. This can be extremely important if you are taking pictures using on multiple cards and want to avoid accidentally deleting or overwriting previous images. You can unlock an SD memory card by using the switch on the side of the SD card.

Instructions

1. Turn off the camera or properly eject the card from the card reader. This will prevent any data from being lost.

2. Remove the SD card from the camera or card reader. Hold the card with the label facing towards you. You should see a switch on the left side of the card.

3. Move the switch until it is all the way at the top of the card. This is the unlocked position, and the card may now be used or formatted for re-use.

4. To protect your images, follow Steps 1 and 2, then move the switch toward the bottom of the card, which locks the card and protects your images from accidental erasure or overwriting.

Tags: Canon Memory, Canon Memory Card, card from, card reader, card This, Memory Card, side card

Choose A Manual Camera

With digital photography, it has become much easier to snap a shot automatically with minor adjustments to the setting, and view the picture taken right on the camera. If you take a shot using auto focus with a digital camera, the camera will adjust the focus for you. What often happens is that the camera lens focuses on a particular part of the shot, such as the center object, and allows the rest to go out of focus. With a manual setting, you can adjust the focus to what you want to be clear and what you don't need as clear. This gives you much more flexibility in your photography. However, there are still some die hard photographers who choose to take photos with manual settings because you can control more of the shot, and create brilliant photos that were not possible using the digital camera's autofocus.

Instructions

Understand Manual Camera Settings

1. Learn more about manual cameras. The main purpose of a manual camera is for enable manual adjustment of the focus. Normally, a manual camera will be a film camera. However, there is a small ability with digital cameras to switch to manual mode. In this situation, generally the manual focus inputs are transmitted to the autofocus system, where the focus is then changed.

2. The manual focus on the camera basically disables its automatic focus and enables the photographer to adjust the lens manually.

3. There are a few different situations where it is useful to be able to change the focus settings on a camera. One is a low-light situation. Consider trying to take a photo where the autofocus prohibits the shot because there isn't enough light. With manual focus, you can take the shot without it being totally clear in the camera's eyes (formally known as the camera not being able to get a "focus lock') and adjust it to the best focus available.

4. Use manual focus for special effects in photography. For instance, you might want to purposefully have your subject out of focus, to make an interesting shot. You want a blurred image for the effect, or you want something with motion to appear out of focus to show its transitioning.

Choose the Manual Camera

5. Before you make any manual camera purchase, shop around. You can view different manual cameras online by typing "manual cameras" into your Web browser and doing a search. See Resources below for a great Web site that has links to many different manual cameras.

6. Read user reviews for different cameras. This will give you an idea of what others thought about different cameras. You can find such information as how easy the camera is to use, whether it's durable, whether it's worth the cost and how good the photos are.

7. Once you do some tentative research online and have found some manual cameras you might like, head to the camera store, where you can learn much more about which camera is right for you.

8. When choosing a manual camera, consider its weight and if it is easy to hold while you take shots. If the camera is too light, it is hard to get a good grip. Hold different cameras to test this out.

9. Next, you'll want a camera that is light enough to be transported around and not so heavy that it's not easily portable.

10. Find a camera that you can learn to use without much help from the sales associate or the instructions. Test the functions by seeing if you can find the manual settings on the camera easily and can use them without many problems.

11. Consider what other features you want. For instance, if you want to take far away pictures, you want to look at the lens that comes with the camera and the options of lenses you can purchase. You might want a camera that switches back and forth between auto and manual settings. Make sure the camera you choose has this ability.

12. Consider your budget. Some manual cameras can be incredibly expensive, as many of them are made for professional use. You can ask the sales associate to help you find cameras that are not as expensive, but still are easy to use and of good quality. If you have a larger budget, you can purchase a top of the line manual camera.

Tags: manual cameras, manual focus, camera that, different cameras, manual camera

Buy A Tv Converter Box

TV converter boxes work with older analog TVs, allowing owners to keep using them after the digital transfer in June 2009. After that date, all U.S. television stations will broadcast in digital, which means that analog TVs need a converter box to receive any stations. Converter boxes retail for about $50 to $80 and are available at any electronics store. But which one should you buy? The answer depends on your particular needs.

Instructions

1. Consider the quality of the picture. Although converter boxes can't provide HD quality, their signals should be strong and clear regardless (about equal to the image quality of a standard DVD). Compare the converter's digital tuner and make sure it can provide a solid image even if the signal from the TV station is weak.

2. See if the converter box has an analog pass-through option. Certain small local stations might continue to broadcast in analog after the crossover date. A converter box with analog pass-through allows you to keep watching them. Otherwise, those stations will be cut off.

3. Check the electronic programming guide feature of the converter box. This displays information about the show currently being aired, such as the title, its content and upcoming programming. Some TV converter boxes provide more elaborate information than others, which could be a factor in deciding which one to buy.

4. Count up the number of other devices connected to your TV and make sure the converter box has outlets for all of them. This is especially important when it comes to a VCR. You can record shows with it only by hooking it up to the converter box (usually through RCA A/V cables, which are labeled red, white and yellow).

5. Think about buying a second converter box. Although you can record shows on a VCR using just one converter box, you won't be able to record one show while watching another. A second converter box, however, will allow you to do so. If you have the means and sometimes want to watch two shows airing at the same time, you should seriously consider it.

6. Examine any closed-caption options if you are hard of hearing. Many converter boxes offer closed captioning, but some may be more elaborate and/or user-friendly than others. Ask for a demonstration of the closed-captioning facilities before you buy.

7. Look for a converter with an aspect ratio adjuster. Digital TV shows are sometimes broadcast using a different screen ratio than the kind your TV has. A converter box that lets you adjust the ratio ensures that the image never appears distorted or cut off.

8. After you've decided on the features that suit you best, shop around at different stores to find the digital converter box with the best possible price.

Tags: converter boxes, converter with, analog pass-through, boxes provide, converter boxes provide

Sony Xt100hd Installation Information

The XT-100HD is a high definition radio tuner that can be connected with an existing Sony BUS car audio head in order to receive a high definition radio signal. There are instructions for installing the XT-100HD device.

Installation Instructions

The XT-100HD is designed to be installed underneath a car seat but above the floor carpet to ensure adequate air circulation. Four screws are supplied in order to mount the device to the surface. Using the supplied BUS cable, the XT-100HD can be connected to the back of the car audio head unit. The XT-100HD also includes input and output terminals for connecting iPods and other media devices.

Specifications

The XT-100HD requires a mounting area of 7 3/4 by 1 5/16 by 6 inches (176 by 32 by 150 mm) to accommodate the size of the device and brackets. Connection to a DC 12 volt car battery, including a negative ground wire, is also necessary in order to supply the XT-100HD with power.

Compatibility

The Sony XT-100HD radio tuner is compatible with Sony BUS car audio head units in vehicles produced in 2005 or later and include the following devices: CDX-R3310, CDX-R30M, CDX-GT30W,CDX-GT300, CDX-GT40W, CDX-GT400, CDX-GT50W, CDX-GT500, CDX-A251C, CDX-GT315C, CDX-GT31W, CDX-GT41UW, CDX-GT51W, CDX-GT61UW, CDX-GT310, CDX-GT410U, CDX-GT510, CDX-GT610U, CDX-HS70MW, CDX-HS70MS, CDX-F50M, CDX-M8815X, CDX-GT705DX, CD-GT805DX, CDX-GT71W, CDX-GT710, CDX-GT81UW, MEX-1GP, MEX-DV2000, XAV-W1, CDX-GT610UI and CDX-GT61UI.

Tags: audio head, definition radio, high definition, high definition radio, radio tuner, Sony audio, Sony audio head

Care For A Begonia

Begonias are a genus of plants consisting of more than 1,000 species of plants and as many as 10,000 hybrid varieties. Some are cultivated for their colorful foliage, other for their blooms, some are valued for both. All species can be successfully grown as house plants, but some are also able to live outside. Fortunately for begonia growers, despite the genus' diversity, the care of all begonias is similar. Read on to learn more.

Instructions

1. Give all begonias the bright sunlight of an eastern or southern window. For begonias grown for their foliage, such as rex begonias, the light should not be direct, but rather filtered with a transparent curtain or shaded by a tree outside the window. Flowering begonias, however, need several hours of direct sunlight each day.

2. Provide a stable temperature for begonias. Begonias are sensitive to rapid fluctuations in temperature and therefore must be kept away from drafts. As long as the temperature is constant and above 60 degrees Fahrenheit begonias can thrive.

3. Water begonias between once a week and once every two weeks. You must take care not to over water a begonia because too much water can cause the plants to rot. Monitor the dampness of the potting mix and when you can stick your finger into the potting mix and not feel any moisture, it's time to water.

4. Keep begonias in small pots. Begonias have small root systems and do not need repotting frequently. However, every spring pull the root ball out of the pot and check to see if the roots have completely wrapped around the bottom of the pot. If they have, upgrade the begonia plant to the next size pot.

5. Move flowering begonias outside during the spring, summer and fall months if you can create the right conditions for them. Flowering begonias enjoy a shady porch as long as the temperature does not fall below 60 degrees Fahrenheit. Begonias growing outside do need more frequent watering, so take care to check the soil often.

Tags: degrees Fahrenheit, long temperature, take care