Sd Card Vs Sdhc Card Comparison

SD and SDHC cards are used in electronic devices, such as digital cameras.

The SD memory card specification allows for the creation of easily portable memory cards that are compatible with more than 400 devices. Variations of SD cards are used to provide data storage in cellular phones, camcorders, MP3 players, digital cameras and a variety of video game systems. SDHC cards, a higher-capacity version of standard SD cards, expand the available storage space of compatible devices even further.

SD Cards

Standard SD cards meet the SD 1.0 specification and provide up to 2 GB of data storage for devices. SD cards are formatted by default using the FAT32 flash media format. The cards can be used to store music, digital pictures, video and game data for any device labeled for use with SD, SDHC or SDXC cards. Computer adapters or USB devices which accept SD cards allow the cards to be used with a PC to transfer files or to act as additional file storage space.

SDHC Cards

SDHC cards conform to the SD 2.0 specification and provide significantly larger amounts of data storage space. SDHC cards are available in storage capacity sizes ranging from 4 GB to 32 GB and are also formatted using FAT32. Not all SD-compatible devices are compatible with SDHC cards; the cards should only be used in devices that specify compatibility with SDHC or SDXC cards or which state compatibility with cards in the SD format at a capacity greater than 2 GB.

Available Sizes

Both SD and SDHC cards are available in three different size configurations. Standard size SD and SDHC cards are 32mm x 24mm in size with a thickness of 2.1mm. MiniSD and miniSDHC cards are 21.5mm x 20mm with a thickness of 1.4mm. MicroSD and microSDHC cards are 15mm x 11mm in size and 1mm thick. Mini and micro SD and SDHC cards are available at the same capacities as the standard cards of each format. Standard cards feature a 9-pin interface, micro cards feature an 11-pin interface and mini cards feature an 8-pin interface for connecting with devices. Write protection is available on standard-sized SD and SDHC cards, but not on mini or micro cards. Adapters are available which enable mini and micro cards to be used with standard-sized devices.

Speed Classes

SD and SDHC cards both make use of the standard Speed Class categorization for the SD card interface. The Speed Class of a card indicates the rate at which it transfers data; cards can have a Speed Class of 2, 4 or 6 for standard-speed transfers or 10 for high-speed transfers. SDHC cards can also be used in devices which support UHS Speed Class 1, a faster transfer class that standard SD cards are not compatible with.

Tags: SDHC cards, cards used, SDHC cards, Speed Class, cards available, cards feature, compatible with

Sirius Stiletto 2 Specifications

The Stiletto 2, an upgrade to the Stiletto 100, is a portable satellite radio that also has MP3 player capabilities. The Stiletto 2 is smaller and lighter (by about 25 percent) than the first-generation unit. Listeners of Sirius satellite radio benefit from its compact size and consider it a good portable radio to carry while exercising outdoors.

MP3 Player Feature

The Stiletto 2 shares many features with the Stiletto 100, including the capacity to record live satellite music. The portable player provides support for MP3 and WMA (Window Media Player) tracks, which include subscription tracks from the likes of Rhapsody and Yahoo Music. The device has 2 GB of internal flash memory.

Recording Features

Sirius listeners can record up to 100 hours of their favorite shows or programs. The Stiletto 2 has a one-touch recording button that makes recording hassle-free. This unit is able to store up to 10 hours of songs that play on Sirius. Any listener can bookmark or tag their favorite songs for purchase by using a compatible online music service, such as Apple iTunes. Additionally, Stiletto 2 users can replay recordings of Sirius music, programming and shows by pushing pause, rewind and replay. You can listen to up to 60 minutes of live radio, with the ability to navigate commercial-free music channels or media files. The Stiletto 2 has a large (2.2-inch), vivid display screen that showcases song titles, artists and even real-time updates of your favorite sports scores. The Stiletto 2 has enhancements that improve the studio bass, and listeners are able to customize this portable satellite radio for a better listening experience.

Dimensions and Radio Specs

The Stiletto 2 measures 4.37 inches in height by 1.93 inches in width by 0.64 inches in depth. The radio weighs 4.3 ounces. It has an internal memory of 2 GB and uses a microSD card that holds up to 8 GB within a standard Wi-Fi of 802.1 b/g. It has two lithium-ion electric batteries rather than one, decreasing its width from its predecessor by 25.5 millimeters, to 18.25 millimeters, and its weight from 5.6 ounces to 4.6 ounces. The Stiletto 100 was 110 millimeters wide, 50 millimeters high and 16 millimeters thick, in addition to weighing 4.3 ounces. The Stiletto 2 has satellite frequencies of 2322.293/2330.207 megahertz and terrestrial frequencies of 2326.250 megahertz.

Included Accessories

The Stiletto 2 comes with a 5-volt, user-replaceable battery that lasts four hours. The radio allows 10 hours of uninterrupted live access to Sirius and 20 hours of non-live access. The Stiletto 2 includes the radio, earplugs, headset antenna, battery, A/C power adapter and PC cable. It comes with My Sirius Studio software.

Cost

As of June 2010, Sirius has ceased selling the Stiletto 2. In December 2010, a Stiletto 2 would cost anywhere from $149 to $160. A number of online retailers continue to sell Stiletto 2s within their inventory. Those wanting to have a Stiletto for their vehicle and home may pay about $50.

Tags: satellite radio, comes with, ounces Stiletto, portable satellite, portable satellite radio

Convert Megapixels To Dpi

Calculating dots per inch, or dpi, from megapixels, or mgp, may seem complicated. Cameras offer anywhere from two megapixels to more than 10 megapixels, and sometimes refer to "pixels per inch" (ppi) instead. Toss those numbers and terms aside, however, when all that's needed is a simple calculation to convert megapixels to dots per inch.

Instructions

1. Determine the maximum image size (horizontal and vertical) in pixels for the camera. Most cameras state the number of megapixels right on the case. This is the product of multiplying the maximum width in pixels by the maximum height of an image in pixels and dividing by 1 million. The numbers are usually in the owner's manual or on the manufacturer's website. For example, a camera that takes 2,048-pixels wide x 1,436-pixels high equals 2,940,928 pixels. Divide by 1 million and you get 2.9 megapixels.

2. Determine the size at which a photo is to be printed. Divide the width in pixels by the width in inches. The quotient is the number of dots per inch. Repeat the task with the height in pixels by the height in inches. The dpi numbers should be approximately the same. For example, a 2,048-pixel image to be printed 10-inches wide has a printed resolution of 204.8 dpi.

3. Increase the photo quality by increasing the number of dots per inch. In other words, printing photos at smaller sizes will make the quality better, as the dpi will be higher.

4. Control the dpi with the output device---a printer or digital-document converter settings (as when making a PDF)

When a printer is set to 120 dpi, for example, the digital publisher knows that the maximum image size is 25 inches by 17 inches: The 3,008 pixel width and 2,000 pixel height are both divided by 120 to calculate the size in inches.

Tags: dots inch, from megapixels, image size, maximum image, maximum image size, number dots, number dots inch

Block Incoming Cell Texts

In a world that thrives on technology, it is not surprising that people take advantage of any means of communication to push their products or services. If you are receiving unwanted text messages, you can do something about it. It is a simple task, but one that varies by service providers.

Instructions

1. Call your cell phone provider and tell a representative that you wish to stop receiving text messages from certain numbers. Your provider will walk you through the steps necessary to set up this option.

2. If your provider is AT&T, dial 611 from your cell phone to request this option. The company's automated system will take you through a series of prompts to turn off incoming text messages and outgoing messages. Sprint also has this feature available to its customers. You must call customer service at 888-211-4727 to activate a block on your text messages.

3. Until those services are activated and if you're still receiving spam text messages from a business, reply to the unwanted text and type "unsubscribe." This should make the texts stop from this organization.

Tags: text messages, cell phone, messages from, text messages from, this option, unwanted text, your cell

Instructions For The Panasonic Digital Dbs Phone System

The DBS system is well suited for small businesses.

The Panasonic Digital Business System phones are designed for small business usage. The DBS phones have hold and call transfer functionality, and come in three different cabinet sizes. The phone also features programmable function keys and speed dial capability. It can be used to dial internal numbers, as well as outside lines. Learning to operate the Panasonic DBS without the manual can be a confusing process, but learning the basic functions will foster a general familiarity with the controls.

Instructions

Calls

1. Press a free "Line" key if your model includes them. The "Line" keys are located beside the large display screen on all VBD models. The LED beside the key will flash green to indicate that the line has been selected. If a line's LED is red, it is in use by another phone in your network.

2. Press the "On/Off" button if your model doesn't include "Line" keys. The "On/Off" key is located directly above the "Hold" button, in the bottom right hand corner of the DBS unit. Dial "88" into the number-pad, followed by a line number (between one and forty-eight). If you are dialing a one-digit number, place a "0" before it. The display will show the line you have selected, and you will hear the dial tone for an outside line.

3. Enter the phone number you wish to call on the number-pad. The DBS unit will dial the number. The volume will go through the main speaker until you pick up the receiver.

4. Press the "Hold" key to place the other party on hold. Pressing the "Hold" key will place the call on "System Hold," which means it can be retrieved by any user in your system. This can be useful for a small business, because you can converse with another employee while the other party is on hold or have a colleague best equipped to help the caller take over if necessary. To retrieve the call, anyone on the system can select the held line. The LED beside the line will flash red.

5. Press the "Line" key for your current call to place the other party on "Exclusive Hold." This means that no one other than yourself will be able to pick up the call. The line LED will flash green to indicate that the call has been put on "Exclusive Hold."

6. To perform a call transfer, dial the extension number while the call is on hold. The DBS will open up a new line, and dial the number you've entered. Introduce the caller to your colleague, then hang up the receiver to complete the transfer.

7. Hang up the receiver at any point to end the call. If you are conducting the call through the speaker-phone, press the "On/Off" button to end the call.

Tags: other party, will flash, call transfer, dial number, Exclusive Hold

The Best Compact Sd Camcorders

SD cards are used to record certain video formats.

Camcorders can record video onto a number of different formats, ranging from tapes to digital cards. SD cards will hold a large amount of footage in a digital format. There are a number of superior camcorders on the market that use SD cards. Your choice of camcorder depends on what you are recording and what level of quality you seek.

Panasonic AG-HMC150

The Panasonic AG-HMC150 is a professional-quality camcorder that uses SD cards and is one of the best camcorders on the market for prosumer use. It has an optical image stabilizer and a three-inch LCD display that allows videographers to look through while they are filming or playing back footage. It shoots video in an AVC format and also shoots still images at a 1920-by-1080 format. This SD camcorder is also relatively lightweight, at only about four pounds. The camera is just over six inches in length, making it something you can easily carry with you in a bag or backpack.

Canon FS22

According to infosyncworld.com, the Canon FS22 is one of the best camcorders on the market that uses SD cards. Even though it shoots standard rather than high-definition video, it offers excellent video quality. Because it is a handheld camcorder, the Canon has limited external features, but there is a manual shutter speed that can be adjusted for different levels of light. The Canon FS22 records to 32 gigabytes of internal flash memory, which is more then adequate for a consumer-grade camcorder. However, as of 2010, these camcorders were priced at over $500, raising the question of whether to spend that much money on a standard-definition camcorder.

Sony DCR-SR47

The Sony DCR-SR47 is one of the best SD camcorders, according to infosyncworld.com. It has an optical 60x zoom and its body styling looks very sleek. It is the definition of compact, as it can fit inside a jacket pocket relatively easily and shoots a high-grade standard-definition image. This SD camcorder does not have a lot of external features due to its small size, and the pixel count is lower than that of other SD camcorders of comparable quality. However, the Sony is relatively inexpensive for what it can deliver, priced at $250 as of 2010.

Tags: best camcorders, camcorders market, Canon FS22, best camcorders market, camcorders market that, external features

Manually Focus A Shot On A Camcorder

When using a camcorder, especially an older model, you will have to learn manually focus the lens. Manually focusing the lens simply means you need to adjust the lens of your camcorder in order to achieve a clear shot. Follow these steps to learn manually focus a shot on a camcorder.

Instructions

1. Get into position for your shot. Make sure your camcorder is either on a tripod or in your hand and still.

2. Point your camcorder at the object you will be filming. Hold the camera firmly in place while you are doing this.

3. Move the lens right or left until the object that you are focusing on looks clear. The lens is the cylinder on the front of your camcorder.

4. Once you have the object looking crystal clear, or at least as clear as you want it, hit the record button. If you move after you hit record, you will have to refocus your shot.

5. If you do multiple shots while recording, you will need to refocus your camera on the fly. You can do this by moving the camera slowly from shot to shot and by using your free hand to adjust the lens.

Tags: your camcorder, adjust lens, learn manually, learn manually focus, lens Manually, refocus your, will have

What Is A Diffusion Lens

Filters help photographers create desired effects easier.

A blurry haze or a touch of softness are features that photographers often desire in their photos. It is hard to achieve this look with a standard lens, but adding a diffusion filter to a lens can make the task easier. A diffusion filter is meant to soften tones and bring colors to life. No matter what type of SLR or DSLR camera you have, a diffusion filter will make a great addition to your camera bag.

Bring the Sky to Life

Colored diffusion filters are made to add depth and tone to a particular color that you want to see have a bit more life. Blue diffusion filters are ideal for sky shots and cloud shots, orange, yellow and red filters are ideal for photographs of sunsets and green filters will make grass and trees pop to life.

Reduce Age

A clear soft diffusion filter will help to make skin look smoother and more toned. This is ideal in situations where you are taking a portrait of someone. The filter in this case will reduce the appearance of fine lines and wrinkles and make the skin appear more supple and youthful.

Create a Foggy Haze

Landscape photos often do not have one particular focal point so it is best to soften the entire photograph. An adjustable diffusion filter will give you several different options that you can see immediately through the lens by simply rotating the filter. Choose a strong setting to create a dreamy foggy look or a softer setting to bring out subtle tones in the sky, grass or water.

Lose the Freckles

A medium-strength diffusion filter works well when taking portraits of people that may have blemishes or freckles. This particular filter will work well in the reduction of these skin issues when a soft filter cannot do the trick. A medium-strength diffusion filter also works well when shooting images of babies, hands and feet to make each look very soft and gentle.

Tags: diffusion filter, filter will, diffusion filter will, diffusion filters, filters ideal

Use A Pentax K110d Camera

The Pentax K110D is an easy to use entry-level DSLR.

The K110D is a digital single lens reflex (DSLR) camera first produced by the Pentax company in 2006. Revered for their classic SLR film cameras such as the ME Super and the K1000, Pentax has been a major name in the photographic market since being founded in 1919. Marketed toward the novice and amateur photographer the K110D pairs simple, straightforward operation with quality internal components. Familiarize yourself with the K110D and its capabilities by following the steps below.

Instructions

1. Open the battery compartment cover on the underside of the camera and insert two fresh AA batteries. Close the compartment so that it clicks into place.

2. Slide the memory card cover, located on the right side of the camera body, outward and away from the camera to open it. Insert an SD memory card or ensure that there is already one inserted into the slot. Close the cover.

3. Hold your K110D in front of you and acquaint yourself with all of the dials, buttons and knobs on your camera. Use the visual diagrams located in the operating manual for assistance.

4. Turn the main switch, located on the top right of the camera body, to the "ON" position.

5. Begin shooting by moving the mode dial, located on the top left side of the camera body, to "AUTO PICT." Also move the small lever on the left side of the lens barrel to "AF" for autofocus. This sets the K110D to fully automatic mode, meaning that the camera's sensor and light meter chooses the best combination of shutter speed and aperture (size of lens opening) for an accurate exposure. As you progress in your photography, experiment with the other modes on the dial for more involvement in the photo-taking process.

6. Review your images by pressing the "PLAY" button in the lower left corner of the camera's rear panel. Scroll through the images using the directional arrows on the right side of the rear panel. To switch pack to shooting mode, depress the shutter button halfway.

7. Remove the lens by depressing the small button toward the bottom of the lens barrel and rotating it clockwise. Reattach the lens by aligning the red guide dots on the lens and the mount thread. Rotate it counterclockwise until it clicks into place.

Tags: camera body, clicks into, clicks into place, into place, left side, lens barrel

What Are The Benefits Of Transition Lenses

Millions of people around the world have less than perfect eyesight. They usually correct their vision problems, if they are not severe, with contact lenses or eyeglasses. Transitions lenses help keep the benefits of glasses while you protect your eyes from bright light of the sun, and they have many benefits over traditional sunglasses.

Definition

Transitions lenses are eyeglass lenses that are specially treated to react to the amounts of ultraviolet rays to which the lens is exposed. The higher the ultraviolet ray level, the darker the lenses become. This blocks the ultraviolet rays from the eyes. Transitions lenses are one brand of this type of lens, which is known as a photochromic lens. Other brands that also react to amounts of ultraviolet light are Photogray, ColorMatic Extra, Sungray, and Transhades.

Less Fumbling

One benefit of Transitions lenses is that the wearer does not need to fumble with both a pair of glasses and a pair of sunglasses. This is convenient in that the individual is able to carry less with him, including accessories such as glasses cases or clips. The individual never has to take the time to switch from one pair of lenses to another, as well.

Cost Savings

Because an individual who wears Transitions lenses doesn't need a separate pair of sunglasses, she does not need to spend extra money to have the two pieces of equipment. Since some people are forced to get prescription sunglasses due to the quality of their eyesight, this can save hundreds of dollars.

Specific Protection

Unlike regular sunglasses, the amount of sunlight allowed through Transitions lenses can vary. On very bright days, the glasses will be darker. On cloudy days, the lenses do not darken as much. This means that the individual will have an incalculable number of protection degrees, and that the individual's eyes always will receive the correct amount of light. He, therefore, will not experience the eye strain that accompanies a lens that is not dark enough or which does not allow enough light in.

Protected Sight

High amounts of ultraviolet light damage the eye, specifically the retina. A damaged retina means that an individual will not be able to see an image, since the retina is the part of the eye that translates what we see into nerve impulses that are sent to the brain. Transitions lenses block the ultraviolet light in sunlight and therefore protect the eyesight of the wearer. Many regular sunglasses do this as well, but some do not, and regular sunglass lenses are not capable of adjusting the ultraviolet protection level as Transitions lenses do.

Tags: Transitions lenses, that individual, amounts ultraviolet, ultraviolet light, amounts ultraviolet light, does need, individual will

Restore 8mm Film In Pittsburgh Pennsylvania

If film like this becomes faded, scratched, or damaged, a restoration specialist in Pittsburg may be able to help.

If you have come upon a reel or a spool of 8mm film in Pittsburgh, odds are that, over the years, the film has decayed to some extent due to exposure to oxygen, dirt, chemicals, or liquids. This could make the film impossible to project (due to missing sprocket holes, bends or tears in the film) or difficult to view once it is projected. If you have a sentimental or otherwise important attachment to your film, you may want to investigate local options for restoring film.

Instructions

1. Contact a film restoration specialist via e-mail or telephone. In Pittsburgh, Audio Mastering & Recording Services--located in the South Hills area--will restore film. Alternatively, you can mail your film to out-of-town businesses like Video Conversion Experts or Home Movie Depot and they will restore it and send it back to you. You can find other businesses by searching for "8mm film restoration" on the Internet. Ask to see examples of the restorer's work that demonstrate his expertise in this field. Make sure to get a quote for the work you want done, as prices for this service can vary.

2. Transport your film to your chosen restoration specialist. If you choose a local restoration house, you will be able to drive or walk the film to the business. Audio Mastering & Recording Services is open Monday through Friday, from 9 a.m. to 5 p.m. If you have chosen a specialist outside of the immediate area, you may need to package your film reel and mail it to the company. Make sure to track the package or buy insurance if you value the safety of your film.

3. Pick up your film from the specialist in Pittsburgh that you've chosen to use or, if you're using an out-of-town company, wait for it to be shipped back to you. If you can, ask that you receive some evidence that the film restoration has produced noticeable results. If there were specific conditions that you stipulated before you submitted your film to the restoration company (such as scratch removal, or restoring faded color), make sure that work has been done before you surrender payment. Have the film projected in a darkened room, if possible.

Tags: your film, film restoration, restoration specialist, Audio Mastering, Audio Mastering Recording, Make sure

Dub A Camcorder Recording To Vcr

VHS tapes aren't complete dinosaurs...yet. And since camcorder cassettes can still be a little pricey, to get the most for your money, it's not a bad idea to dub your camcorder recordings to VHS. Not only will you have an easily viewable copy of your video-worthy memories, but you'll also have a brand-new camcorder tape, in a manner of speaking.

Instructions

1. Get a blank video tape. You can buy one brand-new, or just recycle and use one you find around the house. Be sure you're not grabbing the video of your wedding or your first baby's birth, however!

2. Gather together your camcorder's S-video or RCA cables. An S-video cable is a single-ended, round-tipped cable with several little prongs. RCA cables have three ends, red, yellow and white, and will likely have matching color coding on the device you'll connect it to.

3. Locate the video input/output connectors on your television. Newer televisions have them on the front of the TV, as well as on the back (like many older models only have).

4. Attach the connectors accordingly. In the case of RCA cables, red to red, yellow to yellow, white to white.

5. Place the destination VHS tape into your VCR and make sure it is turned on.

6. Turn your television to the appropriate channel for watching VHS movies. In most cases, this will be either channel 3 or channel 4. Some VCR's will start showing a movie immediately no matter what channel your TV is set to.

7. Turn on your camcorder.

8. Set your camcorder to the mode that allows you to playback your video.

9. Press record on your VCR and play on your camcorder as close to the same time as possible.

10. Find a safe place to set your camcorder while you are dubbing the video, grab some popcorn and enjoy the show.

Tags: your camcorder, Turn your, yellow white, your television

What To Do If Your Coffee Maker Smells Like Vinegar

Cleaning your coffee pot regularly helps ensure fresh-tasting coffee.

Vinegar has a strong odor that intensifies when it's heated. The strong smell may be unpleasant and linger in the air and on household surfaces, including in coffee makers, which can make coffee taste or smell like vinegar. Identifying the cause will help prevent the coffee maker from smelling like vinegar.

Causes

The most common reasons for a coffee maker to smell like vinegar are cleaning with vinegar, and acidic buildup. Using vinegar to clean a coffee maker will leave a vinegar smell if the coffee maker isn't rinsed thoroughly. Additionally, coffee is acidic, and built-up residue left in the coffee maker will create a smell similar to that of heated vinegar.

Solution

Clean the coffee pot and filter basket with mild soap and water, scrubbing off any remaining residue, then rinse several times with hot water. Fill the coffee maker with fresh water, turn it on and allow it to make a pot of hot water. Continue running clean water through the coffee maker until it no longer smells like vinegar.

Prevention

Run half a pot of white distilled vinegar through the coffee pot once a month to eliminate and prevent residue buildup. Then make a minimum of five pots of hot water in the coffee maker to remove any remaining vinegar.

Tags: coffee maker, coffee maker, like vinegar, coffee maker will, maker will, smell like

Photograph Soccer Stadium Lights

It can be difficult to take clear pictures of lights, especially when using the wrong type of camera. When photographing stadium lights, there are many things that need to be taken into account, such as the type of camera, when to use the flash feature and the amount of lighting that exists. With a few simple steps, stunning pictures of soccer stadium lights can be taken.

Instructions

1. Purchase the correct type of film. Years ago, it was difficult to take pictures of lights because the films weren't sensitive enough. Presently, there are excellent color films for high-speed photography. Look for a film with an ISO (film's sensitivity to light) of 800. According to nyip.com, most digital cameras have settings that include ISO of 400, 800 and higher.

2. Turn off your flash. Nyip.com says that a vital step in getting good pictures of lights is to turn off your flash. The flash feature on cameras helps to create light in dark situations. Since you are photographing lights already, most of the time the flash is not necessary.

3. Mount your camera on a tripod. Since the flash will be off during photography, you will need a slow shutter speed. The best way to work with this speed is to mount your camera in such a way that will eliminate any source of movement.

4. Take pictures from different angles, especially if it is during twilight. If you want your picture to show some of the natural lighting of the sky in the background, position yourself so that the light of the sky is behind the lights. If you want simply the stadium lights, move so that the background is as dark as possible.

Tags: pictures lights, difficult take, flash feature, stadium lights, type camera, your camera

Reduce Redeye With Iphoto

iPhoto edit wand

iPhoto is an Apple registered product that comes bundled with the Mac operating system. It's a photo imaging application that lets you import, organize and edit your photographs. One of the iPhoto editing tools is the ability to remove red eye from your pictures.

Instructions

1. Open your iPhoto application. You can access this through the icon on your dock. This will bring up your gallery of pictures.

2. Choose the picture on which you want to correct the red eye. To do this, either double click on the picture to open the editing window or click once on the picture and then click "Edit" at the bottom of the task bar.

3. When the picture is opened in the editing window, click the "Red-Eye" button from the bottom task bar. You will receive a message that directs you "To remove red eye, click the center of each eye."

4. Take your cursor and click in each eye (or one, depending on the problem) to see the red eye removed.

5. Once you are satisfied that the red-eye reduction is complete, click "Done" at the bottom of the task bar. Your edited picture will be saved in place of the old one.

Tags: bottom task, editing window, editing window click, window click

Locate A Hidden Gps Device

You can keep yourself from being tracked by a GPS device with a bit of know-how.

A GPS (global positioning system) device can be used to track your location anywhere you go. The devices are small enough to be attached to a car or even planted in your purse or backpack without you knowing. If you are afraid that someone may have planted a GPS device on you, there a few ways to locate it.

Instructions

1. Do a thorough check of your car. This is the obvious place to hide a GPS device. Check underneath the carriage of your vehicle, behind the bumpers, in the glove compartment and under the seats. Make sure to use a mirror in hard to reach areas. Look for a box that is approximately the size of a deck of cards. It is probably black or gray in color. It may be attached to your car with a magnet. If you find it, turn it off and remove the battery.

2. Look through your bags and backpacks. Nowadays, GPS devices are small enough to fit in the palm of your hand. Thus, they can be hidden in other items and disguised as another object. Look through everything in your bags and make sure that there is nothing inside that is unfamiliar.

3. Buy a GPS radio frequency detector (see Resources). This scans for devices that are broadcasting on a specific frequency such as a GPS. Detectors cost $150 to $499, as of October 2010.

4. Turn the device on and wave it around your vehicle and personal items . The GPS detector will begin blinking or beeping when it detects a transmission. It will detect devices within 30 feet.

5. Remove the GPS device once you find it, turn it off and take out the battery. This will keep it from transmitting your location.

Tags: devices small, devices small enough, find turn, Look through, small enough

What Is A Flooded Burial Coax Cable

Coaxial cables are used in a variety of applications, such as cable television cabling or antennas. For placement underground or near other wiring that can harbor interference, flooded burial coaxial cable is a smart choice.

Significance

The layers of a flooded burial coaxial cable give it the durability needed for the applications at hand. Beginning in the middle with the copper conductor, the layers extend out to include the insulator and two levels of braid and foil, which is surrounded by flooding compound and the outside cover.

Benefits

The sticky compound encompassing the cable underneath the cover allows small aberrations or cuts on the outside jacket to be rendered harmless to the cable.

Applications

Flooded burial coaxial cable is also used for large-scale security camera placement over a property. In addition, hotel complexes and mobile home communities benefit from being able to provide cable television, as well as security cameras, to an entire grouping of buildings through convenient burial of cabling.

Tags: burial coaxial, burial coaxial cable, coaxial cable, cable television, flooded burial

Become A Movie Director

Directing movies is exciting and artistically fulfilling--and it can be a big headache. You direct every step of a movie: auditioning and rehearsing actors, supervising the crew and having the final say on scenery and music. You have to stay on schedule, stay within your budget and stay sane when the cast and crew are melting down. If you can handle temper tantrums and typhoons, you may be the next George Lucas or Steven Spielberg.

Instructions

1. Go to college and major in filmmaking (see 149 Decide Which College Is Right for You). According to the Filmmaking Web site (see Resources), the most respected U.S. film schools include the University of California at Los Angeles, the University of Southern California, the American Film Institute and New York University.

2. Move to Los Angeles or New York to get close to the action.

3. Get your foot in the door as an intern or assistant producer on a movie set (see 161 Set Up an Internship). You may not get paid, but you'll gain valuable skills, experience and contacts.

4. Develop your craft, gain as much experience as possible, learn like crazy and work your way up to film editor. When you have some clips to your name and start pulling down a salary, you can begin showing your work to people in the industry.

5. Enroll in a training program for assistant directors, run by the Alliance of Motion Picture and Television Producers and the Directors Guild of America. (Click on "Training Program" at the Directors Guild Web site, see Resources). You'll get experience handling extras, transporting equipment and making arrangements for food and accommodations. Some companies allow you to shadow a director, which gives you valuable on-the-job training as well.

6. Think small at first. Directing music videos, educational films or commercials is a good way to get experience.

7. Raise money to make an independent film. It's much cheaper than it used to be, thanks to advances in digital technology. Enter your film in festivals and pray you get discovered.

8. Become a well-known actor and step behind the camera to direct your own movies.

9. Become a stage director and make the movie version of your latest hit.

Tags: Directors Guild, site Resources, your film

Take A Light Reading

Take a Light Reading

Light readings help the photographer or cinematographer select camera settings, such as aperture and shutter speed, that will result in an image with proper exposure. A handheld or in-camera light meter is used to make a reading. Depending on lighting conditions, one type of reading may be more accurate than another. A reflected light reading measures the intensity of light reflected off a subject while while incident metering measures the strength of the light source itself. Spot metering, as the name implies, measures light from a specific area in the scene.

Instructions

Making a Reflected or Incident Reading

1. Locate your subject. If you are working under tricky lighting conditions, select which part of your subject requires proper exposure.

2. Hold your meter two to three inches from your subject at a 90-degree angle to make a reflected light reading.

3. Operate the meter's controls if necessary. Manual meters require you to rotate a dial to arrive at the recommended exposure settings. New digital models are mostly automatic and will produce settings on an LCD display screen.

4. Stand near your subject and point the meter toward the light source to make an incident reading. Repeat Step 3 if applicable.

5. Read the meter's recommended settings and adjust your camera accordingly.

Making a Spot Reading

6. Point your meter, or your camera if it has a built-in spot meter, at your scene.

7. Look through the viewfinder of your meter or camera and move the metering spot to the part of the scene that requires proper exposure.

8. Interface with your meter if necessary.

9. Read the recommended settings from the viewfinder screen and adjust your camera accordingly.

Tags: your meter, your subject, proper exposure, your camera, adjust your, adjust your camera

Unlock A 3g Phone

The iPhone is configured to work in a specific manner dictated by Apple. Unlocking an iPhone 3G enables user-created programs to be displayed on the cell phone. The procedure has been simplified due to the use of an online unlocking program that can be accessed from any web browser. The free iTunes program used to sync an iPhone on a Mac or personal computer is also needed. The unlocked iPhone can be restored to its original state later if the user desires to do so.

Instructions

1. Connect the cable to the iPhone. Connect the other end of the iPhone cable to a universal serial bus (USB) port on the Mac or personal computer. Wait for the icon of the iPhone to appear on the desktop.

2. Launch the iTunes program that is included with a Mac and provided as a free download for personal computer users by double-clicking its icon inside of the "Applications" folder (Mac) or by selecting it from the "Start," "All Applications" pop-up menu.

3. Right-click on the icon of the iPhone in the left column of the iTunes program beneath the "Devices" tab. Select "Back Up" from the pop-up menu. Wait as a progress bar fills in from left to right at the top of the iTunes program.

4. Go to a free iPhone unlocking website, for example, the JailBreakMe website (see Resources). Follow the onscreen menus to configure the backup for the iPhone 3G. Press the "Jailbreak" button on the website to unlock the iPhone 3G.

5. Wait as the iPhone 3G downloads a series of programs and reboots itself a number of times. Disconnect the iPhone cable from the iPhone and from the Mac when a confirmation window on the website states that it is time to do so. Exit the iTunes program.

Tags: iTunes program, personal computer, icon iPhone, iPhone cable, pop-up menu, program that

Rca Wireless Headphone Problems

Consumers have reported many problems with the RCA WHP wireless headphones. The most common complaints are background noise, inability to hold a signal, uncomfortable fit and breakage of the headphone straps.

Background Noise

The biggest complaint that consumers report with the RCA headphones is constant background noise. Annoying hissing, popping noises and static appear to be uniform problems. The noises appear to increase the closer the headphones are to any other electronic equipment.

Tuning Problems

The headphones appear to have a persistent problem of losing the signal being received. Consumers complain that they have to constantly adjust the tuning knob, and a mere turn of the head can cause the signal to fail. The headphones have to be in very close proximity to the transmitter or the signal will be lost.

Fit and Breakage

A uniform complaint of the headphones is that they are too tight on the head. Most users report that they can be worn only for 30 minutes or so before they have to be removed. It appears that this problem also causes the straps to break easily.

Tags: that they, they have

Plastic Lens Camera Alternatives

You might think using plastic lenses on cameras in these days of high technology is retro and might not produce the best images. You would be right, but both of these reasons is what makes plastic lens cameras an alternative to the ultra-sharp images you can get on a digital single-lens reflex camera.

Lensbaby

The glass for the lens elements in modern SLR camera lenses is some of the best, sharpest and clearest ever made. It records what you point your camera at in exquisite detail. Which is great, but not always what you want. For example, if you are taking a portrait of a pretty woman against a backdrop of flowers outside, if she isn't far away from the background, she and the flowers both will be in focus. This may detract from the portrait. Use a Lensbaby, instead, which is a plastic lens without a focusing ring that will fit on your SLR. Focus it by pulling it toward you with both hands. Pull it to one side to focus on the woman; the other side will remain out of focus and give the flowers a soft effect.

Holga

Use the entirely plastic Holga camera as another alternative. This camera was made for the booming market in China in the 1980s. It has a fixed-focus plastic lens, light leaks and other problems, and uses 120 film. It may be the worst camera available, and that's why it has such a following. Even the company claims no two Holga cameras are exactly alike. Because of the poor quality of the plastic lens, you can get extraordinary photos, images that you may not have conceived of. Light flares may occur and different portions of the image may fade to fuzzy. If you use color film, the lens may give you colors you don't expect.

Harinezumi

The third alternative is the Digital Harinezumi by Superheadz. It actually is a digital camera, but with all the low-end aspects of a Holga. While there is an LCD screen, use it to view photos shot. Frame photos with the plastic square on top. It basically is point-and-shoot. It has low saturation and a less-than-sharp image. Use it to shoot video clips that will end up looking a bit like old 8mm film.

Tags: plastic lens, that will

Repair Electronic Flash

Electronic flashes provide the right amount of light required to take a clear picture at a fast shutter speed. However, sometimes the flash might not work as you expect. For example, if the "ZOOM" feature has a default setting to "AUTO," you might not get the results you need. Many flashes come with a "wide panel" feature that slides out from the electronic flash. If it malfunctions, it will need to be disabled. You can make adjustments and repair your electronic flash in a few quick and easy steps.

Instructions

1. View the control panel display for warning messages. Refer to your user manual to interpret the symbols on the display screen, then follow the suggested recommendations.

2. Switch the flash settings that are in "AUTO" mode to "Manual." Most electronic flash settings are accessible by pressing the "MODE" button and turning a setting selection dial.

3. Disable the wide panel switch if it is damaged or if the "ZOOM" feature does not work. This might occur if the wide panel is pulled up or not put back in its slot after use. Typically, a wide panel symbol and the word "On" or "Off" will be displayed beside it to indicate its status.

4. Reset the electronic flash to its default settings. Some models require both "MODE" and "LIGHT" buttons to be depressed at the same time for at least 2 seconds. Your particular electronic flash model should come with similar default setting instructions listed in your product's user manual.

Tags: electronic flash, wide panel, come with, default setting, flash settings

Find Free Conference Call Services

Conference calling services can be used to talk to people who are spread out all over the country or even around the world. Many conference calling services will allow you to have 30, 100, 250 or more people on the line at the same time.You might want to hold a business meeting, get together with family members or host a teleseminar.

Some telephone conferencing services have per-minute or monthly charges, but there are many quality services that are totally free. There are dozens of free conference calling services available, so how do you choose one that is right for you? Just follow these simple steps.

Instructions

1. Determine what services you need. How many people will be on the call? How long will the conference be? Do you need to record the teleconference? How will you manage callers?

2. Evaluate free conference call services to find the one that meets your requirements. You can find an annotated list of 30 free providers at the link in the Resources below.

3. Choose a few service providers that meet your needs. Sign up for free accounts. Be sure to keep a record of the call-in numbers and PIN codes that you will need to use when you call in.

4. Test, test, test. Always test a service before using it for an important meeting or a teleseminar. And have a backup service available in case you need it.

5. Invite participants and hold your conference call. If you recorded the call, download the audio file right away. It may only be available for a week or two.

Tags: calling services, conference call, conference calling, free conference

Compare Hdtv Formats 720p And 1080i

It is very difficult for a broadcaster to beam both 720p and 1080i formats considering the expenses and bandwidth it calls for. So, how does one format differ from the other and how does it impact the viewing experience? Find out through the following steps.

Instructions

1. Understand the process of television broadcast. A picture is first electrically scanned and then each line of the scan is converted and beamed on to a receiver in the form of an electrical signal. The receiver decodes the signal back to the scan lines and puts the picture together on your screen.

2. Analyze how the 720p format works. A 720p line consists of 720 lines, each line made up of 1,280 pixels. These 720 lines create a frame and about 60 such frames are broadcast every second. This is called a progressive-scan format and is denoted by the letter 'p'.

3. Analyze how the 1080i format works. A 1080i line consists of 1,440 to 1,920 pixels. These 1080 lines together form a frame. Unlike 710p, 1080i broadcasts only 30 frames per second. This interlaced scanning format is denoted by the letter 'i'.

4. Study the strengths of both the formats. The 720p is perfect for fast moving action, especially sports, while the 1080i is better suited for observing still images in detail like photographs.

5. Analyze the picture quality of both the formats. The 720p offers more brightness and a higher contrast ratio than the 1080i, thus making for a better viewing experience.

Tags: 720p 1080i, both formats, both formats 720p, denoted letter, each line, format denoted, format denoted letter

Make A Custom Sub Enclosure

Sometimes a regular subwoofer enclosure just won't get the job done. The dimensions of your car may not allow you to use one, or perhaps you'd like to build something that is a perfect fit for your particular car audio setup. Here's build your own custom enclosure.

Instructions

Make a Custom Sub Enclosure

1. Choose your subwoofer. You'll pick your subwoofer based on the amplifier you're teaming it up with, your budget, your preference in music, and your own unique sense of style.

2. Determine the cubic volume needs of your subwoofer. The literature that comes with your subwoofer will give you a specific set of guidelines as the the cubic volume that the subwoofer will work best with. This will determine the volume of your subwoofer enclosure.

3. Measure your possible mounting locations in the car. Determining where you'll want to put your custom subwoofer enclosure provides you with some important baseline measurements to work with. For example if your width or height is restricted, you won't want to exceed those dimensions when you design the box.

4. Sketch out your box design. Using the measurements you took in the previous steps, sketch out several enclosure possibilities and determine the cubic volume of each. To do this, simply multiply the width by height by depth in inches and divide by 1728 -- this will give you the volume in cubic feet.

5. Cut your MDF fiberboard to make the separate pieces of your box. In the front panel, cut the opening for the subwoofer. Most subwoofers come with a template that allows you to make an accurate and round hole for the subwoofer. In the side of the box nearest the amplifier, make a hole to mount your speaker terminal cup into.

6. Assemble your box from the cut pieces of wood, using carpenters wood glue and wood screws. Caulk the inside of the box when you're done to ensure that it is airtight.

7. Cut and place the box carpet onto the box. A hot glue gun works very well for this. Add the speaker terminal cup and wire the internal wiring, connecting it to the subwoofer. Then mount the subwoofer into the opening. Enjoy your handiwork by cranking up some of your favorite tunes.

Tags: your subwoofer, cubic volume, subwoofer enclosure, Custom Enclosure, Make Custom, Make Custom Enclosure, speaker terminal

How Does Broadband Work

Definition of Broadband

Broadband is a form of high-speed internet, which is better than dial-up connection. Broadband provides an "always on" and faster connection to the internet.

Types of Broadband

There are a wide variety of broadband technologies available in a lot of areas where they are provided by service providers, the most commonly used types are ADSL,wireless, cable and satellite broadbands. These four types of broadbands all use higher bandwidth than dial-up. Higher bandwidth would mean faster connectitivy and more data can be transferred.

ADSL

The same cables are used to connect the Internet and the telephone when connecting via ADSL broadband. A phone socket filter is added to the phone line which then converts the signal into two separate signals, one for internet access and the other for telephone service. This is why you can still use your telephone even when you are connected to the internet using the same line, unlike dial-up connections wherein you would have to have separate connections if you want to be able to talk on the phone and be on the internet at the same time.

Wireless or WiFi

Wireless broadband is similar in technology with a difference only of picking up the connection wirelessly or without using cable wires or network cables.

This is the type of broadband connection used by laptop and hand-held device users so that these devices can be carried anywhere around the house where signals can be picked up easily for internet connections.

The way Wi-Fi works that it converts the internet data into a radio signal which is then picked up by each wireless device such as laptop and gaming console, in the house using a a wireless card and Wi-Fi adapter.

Cable

Cable can provide digital TV, internet and phone service. This can be easily set-up by your cable service provider by using a set-top-box using a cable modem.

Satellite

Satellite broadband either works via a 'one way' or 'two way' link.

The one way link works by a satellite sending information to your computer using a satellite dish. You still need a phone line in order to click on a link using a normal dial-up connection because there is no way you can send signal back to the satellite. The only advantage this one has over a dial-up connection is that you can download information at high speed.

With a 'two way' link you can do both using the satellite, you can transmit and receive data at the same time without having the need to use a phone line. This is a faster method of the two. The reason why satellite broadband is not as popular as ADSL and cable because it can be costly to install and may be affected by weather conditions.

Tags: dial-up connection, phone line, need phone, need phone line, same time, service This, than dial-up

Problems With Mini Dv Tapes

Problems With Mini DV Tapes

MiniDV camcorders are one of the most popular types of camcorders on the market today. MiniDV camcorders all record video to small MiniDV tapes. Sometimes those MiniDV tapes have problems. Here are a few of the most common MiniDV tape problems and what to do about them.

Eaten Tape

Sometimes the internal mechanisms of a MiniDV camera will malfunction, causing your tape to be "eaten" much like a VHS tape might have been eaten by your VCR. If you catch the damage early on you may be able to wind the tape back into the cassette and save the footage. If a good bit of the tape has been crumpled, then your best bet is to send the tape off to a audio/video repair store to be fixed. Most of those stores can also simultaneously backup your video to a DVD so you won't lose it again.

No Tape

Sometimes your camcorder may give an error message saying there is no tape inserted when you have just put in a new tape. if that is the case try removing the tape and then reinserting it into the camera.

Record Inhibited

MiniDV tapes have a small switch on the side that locks them against further footage being recorded onto them. The idea behind the switch is that if you record something important you can turn the switch to prevent yourself from accidentally taping over your footage. The switch can also occasionally be accidentally tripped. If you get the message on your camcorder that recording has been prevented, check the side of the tape and make sure the switch is moved to the "unlocked" position.

Broken

MiniDV tapes are made of plastic and therefore can be easily broken if they are stepped on, run over with by a car or mistaken for a bone by your dog. if your MiniDV tape casing becomes broken the best plan of action is to take the tape to your local audio/video repair shop to get the tape repaired. Any "repairs" you try to do yourself at home are likely to further destroy the tape rather than repair it.

Dirty

It is easy to get sand or other debris inside your tape cassette, as well as accidentally sit your tapes into something less than desirable that might soil the outside of the case. For external problems, use a lightly moistened paper towel or cloth to remove debris. For internal debris, try opening the top of the tape and shaking out anything that might be inside. You can also use a can of compressed air to lightly remove debris. Do not stick your fingers or other apparatus inside the tape or you may damage your footage.

Tags: MiniDV tapes, audio video, audio video repair, Mini Tapes, MiniDV camcorders, MiniDV tape

What Is A Flip Camera

The Internet has revolutionized the way people view and share video. Back in the old days, memories were recorded on a bulky video camera and watched on a TV using a VCR. Now technology allows videos to appear minutes after they were recorded. If you want to show your videos on YouTube and Facebook, or store them digitally, a Flip camera might be right for you.

Flip Ultra

The basic Flip video camera is the Flip Ultra. Like all Flips, the Ultra fits in your pocket. It comes in black, white, yellow or pink. It can store around two hours' worth of footage. The camera takes two AA batteries, or can be recharged with an optional battery pack. The HD version can take HD-quality videos, but the battery lasts half as long.

Flip Mino

The Flip Mino is a sleek upgrade of the Ultra. It comes with a rechargeable lithium battery. The camera is a lot smaller and the quality slightly better than the Ultra. The HD version is one of the best Flip cameras, and comes in a black or silver design.

Benefits

One of the main benefits of using a Flip is its ease of use. The camera starts up within seconds, and is very portable. To upload clips to a computer, simply flip out a USB connection and hook it up. The small LCD screen helps save power. The camera is perfect for capturing random moments.

Considerations

The Flip camera is great for personal videos and family movies, but it should not be used for professional productions. The camera has limited features for professional videos, and the small size causes shakiness. The camera has auto-focus, and its 2x zoom limits its use.

Size

The Flip camera is available in three storage sizes: 2 GB, 4 GB and 8 GB. The Ultra has a 2-inch screen, while the Mino has a 1.5-inch screen. The HD versions have a resolution of 1280 x 720; the standard versions have a 640 x 480 resolution.

Tags: comes black, Flip camera, Flip Mino, Flip Ultra, have resolution, versions have, versions have resolution

Choose A Camera Zoom Lens

While many digital cameras offer built-in zoom lenses, higher-end models still have removable, external lens options, allowing for extreme variation, and giving unlimited zoom options based on attachments and accessories. When choosing a new camera lens, it's best to get one with features complimentary to your intended use. Every camera will have different lens options available, so the type of lenses offered for your specific camera needs to be factored in your final choice. Generally speaking, reputable camera companies will have a wide range of lens options, making it easy for you to find just the right one for your needs.

Instructions

1. Determine whether you need a fixed view or varifocal lens. Most amateur photographers will prefer the more noticeable functionality of a variofocal lens when compared to the more subtle functionality of fixed view lenses. Fixed view lenses cannot be adjusted for wider or narrower angles, but they do allow for intricate focusing capability. Varifocal lenses allow for adjustments between panoramic and narrow views.

2. Select the best imager option. A larger imager means a larger field of view, which is optimal for most photographers. Common sizes are 1/4 inch and 1/3 inch, with 1/3 being best for most casual photographic enthusiasts.

3. Look for a camera with Pan-Tilt-Zoom options as needed, also known as PTZ capabilities. Most photographers will want simple zoom capabilities, but may not need electronic pan and tilt features. Discern whether or not these features are worth the extra money they may cost.

4. Consider light filtering options. If you're going to be doing a lot of bright, outdoor shooting, an automatic iris filter may be necessary---for most photographers, standard filtering will work fine.

5. Choose the best size lens for your camera and your usage. A standard focal length is about 40 mm to 50 mm. For close-ups, seek a lens larger than 50 mm. For wide-angled shots, choose a lens smaller than 40 mm.

Tags: lens options, fixed view, most photographers, photographers will, view lenses, will have

Get Reception On A Portable Tv

Clear reception and sharp color enhances the enjoyment of watching your favorite game or TV show. What's even better is if you have great reception on your portable TV, which allows you to watch your favorite program wherever you wish. Getting reception on your portable TV can be quick and easy if you follow a few important steps.

Instructions

Get Reception on a Portable TV

1. Turn your portable TV on. You may need batteries, your AC adapter or your car battery (through the cigarette lighter) to power the TV.

2. Pull the TV's rod antenna out of its enclosure, if any, and extend it to its maximum height. Later on, in the process of obtaining a sharper display, you may want to experiment with the height of the antenna to see which position gives the best picture.

3. Look for the function selector. This button helps you choose between watching channels in a VHF band or watching channels in a UHF band. Switch to the band you prefer.

4. Look for the tuning keys. Use these keys to search for the available channels in the band you have selected. The tuning indicator will move past unavailable channels and go to the next available one. Continue tuning until you reach the channel you desire.

5. Adjust the picture quality, if necessary, by use of the brightness dial and the antenna. You may also need to change the angle of the TV to get optimal brightness.

6. Repeat these steps every time you change the TV's location or want to get reception of a different channel.

Tags: channels band, your portable, Reception Portable, reception your, reception your portable, watching channels, watching channels band

Get Pictures Off A Cell Phone

Get Pictures Off a Cell Phone

There are several ways to retrieve photos from your phone. Some phones can send photos directly, while others require a midpoint such as a website to send photos to emails or photo labs.

Instructions

Uploading to Provider Sites

1. Go to the pictures menu, and select the picture.

2. Go to the options menu, and select to upload the photo your provider's site.

3. Visit your provider's website via a computer with an Internet connection, and check to ensure your pictures are there.

4. Enter your email address, and choose the option that allows them to be sent via email. You can also choose to have the pictures sent to a photo lab, where they can be printed.

Using a Memory Card

5. Remove the memory card from your phone

6. Insert the memory card into a personal computer or a computer at a photo lab.

7. Choose the photos you want to pull off of the card, and load them into the computer.

Using Bluetooth

8. Stop by a photo lab that has machines that support Bluetooth. Push the button on the screen that tells the computer you want to download photos.

9. Make sure your phone is within the range that the computer tells you it needs to pick up the signal.

10. Wait for the machine to bring your photos up onto the screen. Then choose the ones you want to load onto the computer or print.

11. Delete the photos from the camera after uploading.

Tags: your phone, Cell Phone, from your, from your phone, memory card, menu select, photos from

Garmin'S Nuvi 350 Gps Unit

The Garmin nuvi 350 is one of the automotive Global Positioning System navigators from Garmin Ltd., a company that specializes in manufacturing GPS products. It is part of the nuvi 300 or 3xx series, which once served as one of the entry-level line-ups of the nuvi family. The nuvi 350 was released in 2005. Even though it has since been discontinued, customers can still buy the nuvi 350 at some online retail stores.

General Description

Each Garmin nuvi 350 comes with preloaded City Navigator NT street maps --- both in two- and three-dimensional form --- and a points-of-interest database that includes ATM machines, gas stations, hotels, restaurants and the like. The voice directions announce the name of the exits and the streets to turn on, and the device enables users to shorten travel time and distance by avoiding certain routes. The nuvi 350 also has travel tools, such as an MP3 player, a world travel clock, a currency and measurement unit converter, a calculator and a picture viewer.

Physical Description and Battery

Each Garmin nuvi 350 measures 3.87 inches in width, 2.91 inches in height and 0.87 inches in depth, while weighing 5.1 ounces. Its anti-glare thin-film transistor touch screen has a white backlight and a display resolution of 320 by 240 pixels. The measurements are a 3.5-inch diagonal, 2.8-inch width and 2.1-inch height. Each device bears a rechargeable lithium-ion battery that provides up to eight hours of battery life.

Status

As part of Garmin's nuvi 3xx series, the nuvi 350 falls in the middle of the line-up. Thus it is placed above the nuvi 300 and 310, yet below the 360 and 370. Unlike the nuvi 350, the 300 and 310 navigators do not provide street names in their voice directions, and they were only available in Europe. The only advantage of the nuvi 360 and 370 over the 350 is the addition of Bluetooth wireless technology.

Pricing and Availability

When it made its debut, the Garmin nuvi 350 had a manufacturer's suggested retail price of $969. As of April 2011, Garmin has stopped production of the 350, as well as other entries of the 300 series. Nuvi 350s are still available with a price range of around $50 to $300 at online retailers.

Tags: Garmin nuvi, Each Garmin, Each Garmin nuvi, nuvi series, voice directions

Copy 8 Mm Films Onto Dvd

You can convert your 8mm film to DVD.

A film projector is required to view 8mm film strips, which are placed on thin reels. This makes it difficult to showcase the material to friends and family members, especially when you are not at home. To fix this problem, you can copy the 8mm film onto a DVD. Although some film processing companies do provide this option for a fee, you can convert the formats yourself, as long as you have the necessary equipment.

Instructions

1. Set up the 8mm film projector and point it at the projection surface (such as a projection screen or white wall). Turn on the projector so you can see the outline of the entire projection area.

2. Position the digital video camera directly under the projector. Zoom in with the lens until the projection area completely fills up the camera lens.

3. Play the film strip, then press "Record" on the video camera. The 8mm film is now saved as a digital file into the camera. Press "Stop" on the camera at any time to stop the recording.

4. Plug the USB data cable into the USB port on the computer, then insert the opposite end of the cable into the USB port on the video camera. Click "Start," "Computer" then double-click the video camera icon. This loads a window with all the available saved video files. Click and drag the 8mm file you recorded onto the desktop.

5. Insert the blank DVD into the DVD burner of the computer, then close out the AutoPlay window that loads onto the screen. Launch the DVD burning program you use (typically Ulead DVD, Nero DVD or Roxio), then select "Video DVD" as the burn format. Click-and-drag the imported video file into the open window, then click "Burn" to create the video DVD.

Tags: video camera, cable into, cable into port, file into, film projector, into port, projection area

Power Amplifier Tutorial

Home audio power amplifiers come in a wide variety of configurations and circuits, and can have a significant overall impact on the sound of your stereo. While many consumers think watts are an important measurement, watts are misleading, because it is simply a function of voltage multiplied by current. While two amplifiers may both measure 100 watts, for instance, one with a better power supply will be able to supply high current and high voltage and avoid clipping, and thereby sound much better.

Tubes

Tubed power amplifiers, which dominated the home audio industry up till the 1960s, came back into vogue in the 1990s. Many audiophiles feel that tubes, which may have higher distortion measurements than solid state amplifiers, produce an even order distortion which doesn't sound as bad to the human ear as solid state type distortion. Tubes will need to be replaced now and then, and that can be expensive.

Solid state

Solid state amplifiers, which use transistors, became popular in the late '60s and early '70s, in part because tube circuits were very unreliable. Solid state amps run cooler, and tend to have better control over bass frequencies than tube amps, which are more noted for a magical sounding mid-range. Solid state circuits are also less efficient than tube circuits.

Circuit types

Amplifiers are available in a variety of circuit types, including Class A, Class B, Class AB, and Class D. Tube amps can also employ single-ended triode designs, ultra-linear designs, and more. A Class A circuit is less efficient, but produces very little distortion. A Class A amp reproduces the entire input wave at the output end. A Class B amp is more efficient because it idles at zero current, whereas Class A conducts the same amount of current all the time. Class AB amps split the difference, helping to eliminate crossover distortion; in a Class AB amp, one circuit or tube is driven until the plate cuts it off, when it switches to the other. Class AB designs are the most popular for high-end stereo power amplifiers. A Class D amplifier is different, in that the output stage switches between "on" and "off" states, so the current is either running or not. The amplifier can be controlled by analog or digital circuits; because the output stages are sometimes "off," smaller heatsinks can be used, and the amplifiers themselves are smaller.

With tube amplifiers, single-ended triode amps use a single triode to produce an output, and operate in Class A. They typically have a lower power output, but many audiophiles praise their midrange clarity. An ultralinear design uses beam tetrodes or pentodes, and has taps on the output transformers. The taps connect to the screens of the tubes, driving the tubes with part of the output signal and lowering the overall distortion significantly. Ultralinear designs are used in tube amps with higher power outputs.

Tags: Solid state, Class Class, power amplifiers, amplifiers which, Class circuit, Class Class Class, distortion Class

My Denon Avr5803 Receiver Won'T Turn On

The Denon AVR-5803 home theater A/V surround sound receiver won't turn on if a problem with the remote control, power cords, power source or location of the receiver exists. Of course, an equipment defect or malfunction can also cause the unit to stop working. In many instances, you can resolve this issue and turn on your Denon 5803 without professional technical assistance by reviewing these basic causes and making any changes necessary.

Instructions

1. Press the "On/Standby" power button at the front of the unit to try to turn it on without the remote control.

2. Open the RC-8000 remote's battery compartment cover if your receiver doesn't turn on, as the issue is likely with the remote. Check that you inserted any new batteries correctly -- with the polarity marks on the batteries matching those in the compartment. Reposition or replace the batteries as needed and then try the remote again.

3. Stand closer to the receiver -- within 22 feet -- if the remote still won't turn it on. Make certain that no obstructions such as people or furniture block the remote signal or the remote sensor.

4. Check the AC power cord connections at the back right side of your unit and at the wall or surge protector electrical sockets if the unit didn't turn on in Step 1 or still won't turn on after using the remote control. Push any loose plugs into the sockets. Replace any damaged cords.

5. Plug another device into each wall or surge protector electrical socket to confirm that the sockets are working if you can't find any problems with the cords. If a socket isn't working, check the circuit breakers, repair the socket on your own or hire an electrician to evaluate and fix the issue.

6. Move your unit from its current location to an area away from bright light or other electronics. Bright light can interfere with both the remote control signal and the remote sensor's ability to pick up the signal. Some electronics transmit electromagnetic signals that can also interfere with the remote control and sensor or cause the unit to stop working correctly.

Tags: remote control, with remote, cause unit, cause unit stop, interfere with

Is There A Selftimer On The Canon Powershot

Canon PowerShot point-and-shoot cameras have several options for taking photographs, all of which help you control the conditions under which a photo is taken. A feature that many casual photographers look for in a point-and-shoot camera is a self-timer, which controls a delay between when the shutter button is pressed and when the camera shoots the picture.

Self-timer Uses

The most common reason to use the self-timer on a Canon PowerShot camera is to include yourself in a photograph. A 10-second delay after you press the shutter button gives you time to put yourself in the picture. You can also use the self-timer to reduce camera shake caused by the act of pressing the shutter button, particularly if conditions dictate that the shutter speed will be slow. Although it doesn't take much effort to press the shutter button, any camera shake can blur the image.

Delay Options

The Canon PowerShot self-timer allows you to set both the length of the delay before the shutter is triggered and the number of pictures the camera will take after the delay. The maximum delay is 30 seconds. You can set the camera to take up to 10 pictures after the delay.

Timer Settings

The navigation button on the back of many Canon PowerShot cameras has clock symbol on it, indicating the self-timer feature. Press the down navigation button to access the self-timer settings screen. On cameras without a self-timer button, press the "Func./Set" button to access the main menu. Press the navigation buttons to highlight the clock symbol and access the self-timer settings.

Shooting with the Self-Timer

Set the camera on a steady surface or tripod, and frame the picture. Hold the camera in your hands to frame the picture if you are attempting to reduce camera shake and don't want to use a steady surface. Press the shutter button halfway to focus, and then press it fully to start the timer. The camera takes the picture after the set delay.

Tags: shutter button, Canon PowerShot, after delay, camera shake, access self-timer

Replace A Camera Lens

Many digital SLR or 35-millimeter film cameras use detachable lenses.

Many photographers use multiple lenses to produce different photo results with 35-millimeter film and digital SLR cameras. This requires frequent lens swapping while shooting photos. Replacing a camera lens on your camera tends to be a fairly easy task if you follow the instructions for your particular camera. Following the correct steps will not only protect your camera, but it will also ensure you don't get foreign particles inside your expensive lenses.

Instructions

Handling and Lens Replacement

1. Locate your replacement lens and remove the rear cap. Make sure not to get any particles inside the lens or to touch the glass. Put the replacement lens either on a table or have it ready to pull out of your camera bag.

2. Place your camera on a table or have it strapped around your neck. Hold the camera by the body. Locate the trigger on the side of the lens connected to the camera body. Release the lens lock in the camera body by pressing the lock button. Twist the lens clockwise until it releases from the camera body. Put the lens on the table or in your camera bag, and insert the replacement lens into the camera body. Turn it counterclockwise until it locks into place.

3. Take the lens you removed and place the front lens cap if missing. Place the rear lens cap from the replacement lens on the back of the removed lens. Put the removed lens in your camera bag, in a lens case or in safe location in your office or home. Make sure it doesn't sit were it can be knocked over or dropped.

4. Test your replacement lens by turning on the camera and focusing on an object. Make sure the replacement lens responds to the auto-focus direction when you click once on your camera trigger button. Take photos as desired.

Tags: your camera, replacement lens, camera body, Make sure, your replacement lens

Convert 35mm Slides To Digital Photos

35mm slide conversion process.

Transferring old 35mm slides to digital format not only will preserve the originals but offers ways to enhance them as well. It can be a time consuming operation, although with practice and the right equipment, the time per slide can be reduced to less than 30 seconds. Editing and improving the appearance may take longer. Converting slides to digital images does not require an expensive scanner; equipment under $100 will do the job. However, for the highest quality end result, more costly dedicated film scanners are needed. In either case, good photo editing software is a must to clean up the scanned results.

Instructions

1. Remove any protective sheet from the glass cover of the scanner if there is one to expose the film guide.

2. Remove or tilt out the film guide from the cover for access and open the film holder on the guide.

3. Insert the slides into the film guide. If there are not sufficient slides to fill the guide, block the uncovered parts with a shield to prevent extra light from spoiling the scan. Then replace the film guide in the scanner cover. It may take some experimentation to ensure the image will be scanned with the correct orientation.

4. Open the photo editing software on the computer and choose color or black and white and negative or positive film depending on the type of slide. Identify the number of slides being scanned; adjust any desired settings for output resolution and size. Start the scanning process.

5. Save the images in TIFF or JPEG format to the computer. TIFF format is best for archival storage since it preserves all the data, while JPEG compresses data resulting in some possible degradation of the image if it is reused and saved often.

Tags: film guide, editing software, photo editing, photo editing software, slides digital

Improve The S50 Reception In My Home

When you purchase satellite radio for your home, you'll receive a receiver that transmits the radio stations from a satellite dish to your satellite radio devices. If you've purchase Sirius satellite radio, the receiver is called the S50. The S50 makes it possible for you to listen to your Sirius in your home, but when placed in the wrong area or obstructed incorrectly, you might get a weak signal. To avoid disruption in your audio, improve the S50 reception so you always receive your favorite Sirius channels.

Instructions

1. Set up your satellite receiver properly. The S50 should be set up near a window for the best reception. Always place the receiver due south, facing the actual Sirius satellite.

2. Open the S50 only halfway with the back of the receiver facing the window. Then, turn on your radio and access "Setup" and "Signal Indicator." Watch the indicator as you tilt the S50 and stop once you have full signal strength. Check the signal strength when you lose reception; you might need to readjust the S50 position from time to time.

3. Remove anything that could obstructing the S50's reception. For instance, the window nearest the S50 should be unobstructed by implements such as blinds or drapes. Beware also of bars, screens, trees and shrubs, buildings and roof overview of the S50's view of the sky.

4. Purchase a home dock for your radio. Your home Sirius comes with the receiver that transmits to available radio devices around the home. While the radios are portable, they work best when docked in a home docking station connected to the S50 which helps the radio receive a better signal. Your S50 is more effective when transmitting to a docked radio.

5. Keep radios and other wireless devices close to the S50. The receiver transmits up to 30 feet wirelessly, so expect to hear some choppiness or experience a loss of signal if you move your radios too far from the receiver.

Tags: satellite radio, radio devices, receiver that, receiver that transmits, signal strength, Sirius satellite

Update Tmobile 3g Coverage

Your third generation (3G) phone offers enhancements such as high-speed transmission, global roaming and access to multimedia content. T-Mobile offers the appropriate software updates for your specific 3G phone. These updates include features and software components that improve the overall experience with the network. To update your phone, you need to connect it to your computer with a USB cable and sync software.

Instructions

1. Back up information on your phone with a memory card or backup software. The upgrade will wipe your phone's memory.

2. Visit the T-Mobile Download Center. (See Resources.) Download the Dash Update Utility. Click "Save" and save it to your desktop.

3. Double click the utility to open it. Attach the USB cable to your T-Mobile phone. Plug the other end of the cable to an available USB port on your computer.

4. Wait for your sync software to detect your phone and launch. Click "Start" and "Control Panel." Disable standby and hibernation modes.

5. Check "I completed the steps indicated" above on the software. Click the "Next" button. Click "Next" until the software prompts that you are ready to update your phone.

Tags: your phone, Click Next, sync software, update your, update your phone, your computer