A Bluetooth device can allow you to talk on your Kyocera Strobe phone when you cannot hold onto the phone. This is especially useful when driving, as holding your cell phone while you're behind the wheel could cause you to get pulled over by a traffic cop. In order to use a Bluetooth with a Kyocera Strobe phone, you will need to "pair" the two devices. Doing this is very easy, and takes about 2 minutes to complete.
Instructions
1. Charge your Bluetooth device. Turn your Bluetooth off and then plug it in. Leave it plugged in for 30 minutes to an hour.
2. Unplug the Bluetooth and then turn on the device. Place it near your Kyocera Strobe phone.
3. Grab your Kyocera Strobe Phone and go to the "Menu" option on the phone. Then, choose "Bluetooth." After that, you will need to select "On/Off."
4. Select the "On Invisible" option. Then, go back to the "Menu" screen.
5. Choose the "Bluetooth" option once more. This time after selecting Bluetooth, you will need to open the "My Devices" option.
6. Select the "Find New" option. Your Kyocera Strobe phone will then look for the Bluetooth device listed in Steps 1 and 2.
7. Click the "Add" button. Your Bluetooth will appear on the screen. Make sure that device is highlighted and click the "Add" button again.
8. Enter the password for your Bluetooth in the "Enter Passcode" box in the middle of the screen. You can find this password in the manual for your Bluetooth device. Then, press the "OK" button. Once you do this, your Bluetooth will be paired with the Kyocera Strobe phone. You can then use the Bluetooth each time the device is on, and you take or place a call with your Kyocera Strobe.
Tags: Kyocera Strobe, Bluetooth device, Strobe phone, your Bluetooth, Bluetooth will, will need
