So you want to wire your house for stereo. This process can go from very easy to very hard, depending on how many different sets of speakers you have, and how far away they will be placed from your stereo system. This article will give you a quick run-down of what you need and get it all hooked up just right.
Instructions
1. Install the speaker selector to the secondary speaker outs on your stereo system.
2. Establish where you would like each of your sets of speakers, and place them in the appropriate locations.
3. Measure the distance from the speaker selector to your first set of speakers, making sure to take into account how you want your wire to run (through the wall or around a door).
4. Cut an appropriate length of wire. Strip the wire down about 1/2 an inch on either end, and twist the fibers from each wire together.
5. Insert one end of the wire into the speaker selector, and then using the staple gun and drill, attach to the wall and thread through the wall, where necessary.
6. Repeat for each set of speakers.
Tags: speaker selector, sets speakers, stereo system, through wall, your stereo, your stereo system
