Race scanners enable users to tune into the same frequencies used by race car drivers and their crews. Users can listen in live as drivers and crew exchange information during the race.Take some time now before the big race to review the device's basic instructions.
Instructions
1. Slide the "Race/Off/FM" switch to the "Race" option to pick up race broadcast, or to "FM" to listen to FM radio signals.
2. Use the "Tune" arrow buttons to search for an FM or race frequency. Alternatively, key in a specific frequency. Press the "Mode" button to switch to "Direct" mode. Use the Proscan 100's numerical keypad to input your frequency, after pressing "Mode."
3. Press the "Save" button to store a frequency to one of the scanner's 199 memory banks. Key in the bank where you'd like to store the frequency. Use any three-digit value between 001 and 199. Press the "Save" button to store it.
4. Delete any unwanted channels. Hold down the "Mode" button until "Delete" appears on the screen. Key in the three-digit bank number, and then press the "Save" button to delete the frequency from the bank.
Tags: Save button, button store, Mode button, Press Save, Press Save button
