Following the introduction of cassettes and compact discs, vinyl records were pushed to the background, and mostly stored away in attics or basements. But a backlash soon arose based on the widespread perception that digital sound sources cannot match the tone of vinyl. Often, old records can be cleaned up and made to sound just like new with very little effort.
Instructions
1. Insert a pencil into the center hole of the record. This will minimize the amount of contact your fingers have with the actual sound source.
2. Saturate a lint-free cloth with alcohol. Hold the record with one hand on the pencil and two fingers on the paper label. Carefully wipe the record clockwise with the saturated cloth, rubbing the alcohol gently into all of the grooves to remove any dust, dirt or grime.
3. Turn the record over and repeat on the other side. Allow the entire record to dry before putting it on the turntable.
4. Fill a spray bottle with alcohol. Turn on the turntable and lightly mist the record. Put the needle stylus into position and begin playing the record. Spray any dry spots on the vinyl before the spot reaches the stylus.
5. Keep the record misted the entire time it is playing. You should be able to hear the entire album or song with little or no noise (other than that of the actual recording).
Tags: with alcohol
