The NuTone company manufactures several models of intercom stations designed for indoor and outdoor use, and in large or small setup locations. Each NuTone Intercom Station system model has its own sets of functions and features that make it unique in the NuTone Intercom series, such as AM/FM radio tuner capabilities or CD changer capabilities. However, since all NuTone Intercom stations come with their internal wiring pre-configured and connected, they all have the same basic process for wiring at installation time.
Instructions
1. Loosen each of the "Line 1" screws on the terminal board of the intercom station, then place each of the color-coded wires of the IW-6 cable from the intercom remote under each of the corresponding colored screws on the board (red/white to "red/wht", black to "blk," etc.). Tighten each screw to hold the cable wires in place on the board.
2. Plug the two intertwined IW-2 speaker wires under the "Door Speaker" screws on the terminal board, then tighten the screws to hold the speaker wires in place on the board.
3. Plug each of the 9 to 14 pin plug wires from the main station unit to each corresponding port on the terminal board. There are five of these wire plugs (CN104, CN106, CN101, CN116 and CN102).
Tags: terminal board, board Plug, each corresponding, Intercom Station, NuTone Intercom
