A flash light meter is simply a device that allows you to measure the amount of light present from a certain angle. A flash light meter allows a photographer to find the perfect amount of exposure for a photograph. Put simply, this means that the camera's shutter speed will change depending on the amount of light available. Flash light meters are meant to find the optimum exposure, so your pictures look as clear and vivid as they possibly can.
Instructions
1. Find the film speed that your camera will be using. You will be able to find this right on the roll of film, or on the camera itself, where you load the film. If you are unable to locate the film speed in either of these locations, check the camera's owner's manual.
2. Set the film speed on your flash light meter. You will be able to do this with knob that turns on the front of the meter, or on newer flash light meters, with a button that controls a digital display.
3. Point the light meter in the direction you would point the camera, as though you are going to take a picture with the flash light meter. The flash light meter will measure the light and provide a number. Take note of this number.
4. Secure your cameras shutter speed, so it corresponds with the flash light meter number. Some cameras will have a knob on the top that you can turn, while digital cameras are likely to have a menu option that allows you to set the shutter speed.
5. Set the shutter speed on your camera, so it coordinates with the number given by your flash light reader. When you are ready, take a picture. The coordination of the light and your shutter speed will ensure the picture turns out perfect.
Tags: light meter, flash light, shutter speed, film speed, flash light meter, flash light meter, amount light