VCRs have been an electronic staple across the world since the late 20th century. To tape your favorite TV shows to enjoy later, you have to connect your VCR to work with your cable box, which can be done with only two cables.
Instructions
1. Connect your cable from the wall to the plug labeled "Cable" in on your cable box. These outputs and inputs should be clearly identified.
2. Attach a cable from the "Cable Out" plug on the cable box to the "Cable In" plug on your VCR. Take your time and make sure to get everything hooked up correctly. Often times there are a good number of jacks and connections, so examine them closely.
3. Run a cable from the "Cable Out" plug on your VCR to the "Cable Input" plug of your TV.
4. Turn the power on for both the TV and the VCR.
5. Make sure everything is working properly together by running a test. You can try to record whatever is on the TV at the time for just a few seconds. After you have recorded a sample, play it back using the VCR. If it works then you are set! If it fails to record anything, go over the steps again to ensure you have properly connected all the cables.
Tags: cable from, Cable plug, plug your, cable from Cable, Cable plug your, from Cable
