A CD (compact disk) changer is a electrical device that holds multiple CDs. The CD changer is wired to the rear of the vehicle's stereo and keeps you from having to remove CDs from the CD player every time that you want to listen to some thing new. You must have at least a basic knowledge of stereos and the vehicle that you are installing the CD changer in. The wires need for the CD change should come with the CD changer but if they didn't then you can buy the wires at a car audio store.
Instructions
1. Place the CD changer in the trunk, console, under a seat or any place the you can if it that you want. Plug the audio cables into the corresponding connections on the CD changer.
2. Cut a strip the ends of the power wire using the wire cutters and strippers. Strip the ends of the power wire 1/4 of an inch from the ends. Connect one end of the wire to the power connection on the CD changer.
3. Guide the power wire to the battery and connect it to the positive output on the battery using the securing clamp that is on the battery. Plug the audio cables into the stereo.
Tags: power wire, audio cables, audio cables into, cables into, ends power, ends power wire
